SEARCH NOW FOR ALL YOUR APEX TOOLS SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
APEX TOOLS
CLECO
24RAA19AM3
NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE OUTPUT, 15 INCH LENGTH, 0.52 INCH SIDE TO CENT ...
✓ IN STOCK!
£1,951.32
Price with VAT:
£2,341.58
APEX TOOLS
CLECO
5RSSTP-10BQ
SCREWDRIVER, 5 SERIES, PISTOL GRIP, SLIDING KNOB REVERSE, 1/4 INCH HEX QUICK CHANGE, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40 IN LB, 4.5 NM, 6.4 INCH LENGTH
✓ IN STOCK!
£601.93
Price with VAT:
£722.32
APEX TOOLS
CLECO
5RSAUPT-10BQ
SCREW DRIVER, PISTOL GRIP, 5 SERIES, PUSH AND TRIGGER START, SLIDING KNOB REVERSE, TOP AIR INLET, #10 SCREW SIZE, 1100 RPM FREE SPEED, 40-3 IN LB, 4.5-.4 NM, 8.4 INCH LENGTH
✓ IN STOCK!
£588.25
Price with VAT:
£705.90
APEX TOOLS
CLECO
5RNAL-254BH-3
NUTRUNNER / ANGLE, CLECOMATIC CLUTCH, 5 SERIES, LEVER START, TWIST RING REVERSE, 1/4 INCH BOLT SIZE, 500 RPM FREE SPEED, 75-10 IN LB, 8.5-1.1 NM, 13.9 INCH LENGTH, 1.2 INCH HEAD HEIGHT, 0.5 ...
✓ IN STOCK!
£1,393.28
Price with VAT:
£1,671.94
APEX TOOLS
CLECO
14E1SA02Q
SCREWDRIVER, 14 SERIES, INLINE, REVERSIBLE, QUICK CHANGE, PUSH-TO-START, #6 SCREW SIZE, 1900 RPM FREE SPEED, 16-3 IN LB, 1.8-0.4 NM, 12.9 INCH LENGTH, 110 V
✓ IN STOCK!
£349.60
Price with VAT:
£419.52
APEX TOOLS
CLECO
17EP06Q
NUTRUNNER, 17EP SERIES, PISTOL GRIP, 2600 RPM FREE SPEED, 4.4-1.5 FT LB, 6-2 NM, #10 BOLT SIZE, 7 INCH LENGTH, 0.84 INCH SIDE TO CENTER
✓ IN STOCK!
£3,410.04
Price with VAT:
£4,092.05
APEX TOOLS
CLECO
18ES31D3
DISCONTINUED BY MANUFACTURER, CLECO 18ES31D3 NUTRUNNER, 695 RPM, TORQ 31.8
✓ IN STOCK!
£3,086.11
Price with VAT:
£3,703.34
APEX TOOLS
CLECO
47BAXB15AM3
DISCONTINUED BY MANUFACTURER, EC TOOL, 47 SERIES, CORDLESS, BATTERY POWER, RIGHT-ANGLE, WLAN: 2.4 GHZ, BATTERY: 48 V MAX., 15 NM, ATTACHMENT: SQUARE 3/8", LOCKING: PIN
✓ IN STOCK!
£611.07
Price with VAT:
£733.28
APEX TOOLS
CLECO
24RAS13AM3
DISCONTINUED BY MANUFACTURER, NUTRUNNER / ANGLE, SERIES 24, CLUTCH SHUT OFF, LEVER START, COLLAR REVERSE, 7.0-14.0 TORQUE RANGE, 700 -1/MIN FREE SPEED, 3/8 INCH SQUARE DRIVE
✓ IN STOCK!
£2,343.60
Price with VAT:
£2,812.32
APEX TOOLS
CLECO
47EA60AM4
DISCONTINUED BY MANUFACTURER, NUTRUNNER, 47EA SERIES, CORDED, 485 RPM, 61 NM MAX TORQUE, RIGHT ANGLE, ELECTRIC TRANSDUCER CONTROL
✓ IN STOCK!
£2,017.85
Price with VAT:
£2,421.42
APEX TOOLS
CLECO
48EAE41AM3
ELECTRIC NUTRUNNER, 48 SERIES, RIGHT ANGLE, TRANSDUCER CONTROL, 41NM, 6.6-30.3FT/LB TORQUE, 17.3IN LENGTH, 1090RPM
✓ IN STOCK!
£8,662.30
Price with VAT:
£10,394.76
APEX TOOLS
CLECO
MPRO300GCD
DISCONTINUED BY MANUFACTURER, NUTRUNNER CONTROLLER, 18/48 AIRLB, CONTROLS UP TO 16 TOOL, 50/60 HZ, 2A, 100/240 VAC, IP42, 1600 VA
✓ IN STOCK!
£2,939.83
Price with VAT:
£3,527.80
APEX TOOLS
COOPER TOOLS
960901
DISCONTINUED BY MANUFACTURER, SERVO DRIVE, STM34, INPUT VOLTAGE 230VAC, RS-232 COMMUNICATION, RESOLVER FEEDBACK
✓ IN STOCK!
£2,081.08
Price with VAT:
£2,497.30
APEX TOOLS
COOPER TOOLS
TMH960902
DISCONTINUED BY MANUFACTURER, SERVO CONTROL DRIVE, 220-240VAC INPUT, 3PH, DC
✓ IN STOCK!
£305.46
Price with VAT:
£366.55
APEX TOOLS
COOPER TOOLS
P34038930300
DISCONTINUED BY MANUFACTURER, PROBE DRIVER, 18V
✓ IN STOCK!
£2,139.10
Price with VAT:
£2,566.92
APEX TOOLS
COOPER TOOLS
Y2K-0S9-V2.9
OPERATOR INTERFACE 68K 110VAC 50HZ
✓ IN STOCK!
£726.80
Price with VAT:
£872.16
APEX TOOLS
COOPER TOOLS
92060023
NEEDLE THRUST RACE
✓ IN STOCK!
£4.49
Price with VAT:
£5.39
Repair Yours
Contact Us
APEX TOOLS
COOPER TOOLS
20449
NUT FOR CLUTCH ASSEMBLY 6/PACK
✓ IN STOCK!
£9.67
Price with VAT:
£11.61
APEX TOOLS
COOPER TOOLS
STM-12
DISCONTINUED BY MANUFACTURER, TIGHTENING MODULE, NUT RUNNER CONTROLLER, 10 AMP, 230 VAC, IP 20, ARCNET
✓ IN STOCK!
£623.73
Price with VAT:
£748.48
APEX TOOLS
COOPER TOOLS
542877
ADAPTER HANDLE
✓ IN STOCK!
£26.47
Price with VAT:
£31.76
Repair Yours
Contact Us
APEX TOOLS
COOPER TOOLS
S961450-003
MONITOR CONTROLLER INTERFACE .7AMP 24VDC
✓ IN STOCK!
£975.94
Price with VAT:
£1,171.13
APEX TOOLS
COOPER TOOLS
933872
APEX TOOLS,933872, MOTOR,NUTRUNNER MOTOR,BRUSHLESS,320V,2.8A, 5000RPM, REVERSIBLE,29/12PIN PLUGS,5000 RPM,300 V,2.8AMP 2BB SERIES,
✓ IN STOCK!
£2,836.95
Price with VAT:
£3,404.34
APEX TOOLS
COOPER TOOLS
595-0424
CLEVIS GRAB HOOK, 1/4INCH, WEIGHT CAPACITY 1800LBS
✓ IN STOCK!
£6.79
Price with VAT:
£8.15
APEX TOOLS
COOPER TOOLS
74124AA7
GEAR MOTOR, 7.7 HP, 3 IN SHAFT
✓ IN STOCK!
£2,207.55
Price with VAT:
£2,649.06
APEX TOOLS
COOPER TOOLS
HP-300
DISCONTINUED BY MANUFACTURER, HEATING HOT PLATE, 27V/280WATT, MODEL 53316099
✓ IN STOCK!
£99.94
Price with VAT:
£119.93
APEX TOOLS
COOPER TOOLS
30PTHLC35Q
NUTRUNNER, PISTOL GRIP, 30 NM, TORQUE CONTROL, HYDRAUYLIC PULSE MECHANISM, LONG GRIP LENGTH, SIGNAL PORT, 3500 RPM, QUICK CHANGE 1/4 INCH
✓ IN STOCK!
£907.29
Price with VAT:
£1,088.75
APEX TOOLS
COOPER TOOLS
932851
DISCONTINUED BY MANUFACTURER, THROTTLE WASHER, POWER TOOLS ACCESSORY, SPARE AND SERVICE PARTS
✓ IN STOCK!
£35.72
Price with VAT:
£42.87
APEX TOOLS
COOPER TOOLS
H10RD12ATC
DISCONTINUED BY MANUFACTURER, NUTRUNNER, AIR LEVER START, STRAIGHT, 1200 RPM
£380.98
Price with VAT:
£457.18
APEX TOOLS
COOPER TOOLS
52910KIT
HAND TOOL REPLACEMENT PART KIT, HARDWARE FOR 52910 AND 52910N, REPAIR KIT
✓ IN STOCK!
£13.36
Price with VAT:
£16.04
APEX TOOLS
COOPER TOOLS
TM34-960901
DISCONTINUED BY MANUFACTURER, SERVO DRIVE CARD, RS232 MALE CONNECTION, RESOLVER CONNECTION: RS232 FEMALE, MOTOR CONNECTION: PCB 7 POSTION CONNECTOR, SUPPLY CONNECTION: PCB 5 POSITION CONNECT ...
✓ IN STOCK!
£124.78
Price with VAT:
£149.74
APEX TOOLS
COOPER TOOLS
60NCR092HD56
DISCONTINUED BY MANUFACTURER, WRENCH, PNEUMATIC, TOOL SPEED 40
✓ IN STOCK!
£329.71
Price with VAT:
£395.66
APEX TOOLS
COOPER TOOLS
73306AA2
DISCONTINUED BY MANUFACTURER, AXIAL PISTON, A2 SERIES, MAXIMUM MOTOR POWER 0.6HP AT 44RPM, 0.45KW, FREE SPEED AT 90, STALL TORQUE 107LBS, 108NM, 53.6:1 GEAR RATIO
✓ IN STOCK!
£109.90
Price with VAT:
£131.89
APEX TOOLS
COOPER TOOLS
M-PRO-400SE MINI S112829
DISCONTINUED BY MANUFACTURER, FREQUENCY CONVERTER
✓ IN STOCK!
£260.33
Price with VAT:
£312.40
APEX TOOLS
CRESCENT TOOLS
52910N
PLIERS; JAW WIDTH: 1.5IN ; JAW WIDTH (INCH): 1-1/2 ; JAW WIDTH (DECIMAL INCH): 1.5000 ; TIP THICKNESS (DECIMAL INCH): 0.3750 ; INSULATED: NO ; TETHER STYLE: NOT TETHER CAPABLE (MOQ=1, PKG QT ...
✓ IN STOCK!
£35.50
Price with VAT:
£42.60
APEX TOOLS
CRESCENT TOOLS
M56RPN
DISCONTINUED BY MANUFACTURER, PLIER, 6 INCH, PLASTIC CUTTER
✓ IN STOCK!
£13.06
Price with VAT:
£15.67
APEX TOOLS
CRESCENT TOOLS
5427CVN
DIAGONAL CUTTING PLIER, 7" OAL 25/32" JAW LENGTH, 1-7/32" JAW WIDTH, ROUND HEAD, DOUBLE DIP HANDLE (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£14.65
Price with VAT:
£17.58
APEX TOOLS
CRESCENT TOOLS
8886CVN
PLIER SLD-JT CURVED 6CV NEEDLE NOSE
✓ IN STOCK!
£19.36
Price with VAT:
£23.23
APEX TOOLS
CRESCENT TOOLS
7776CVN
6-1/2" OAL, 2" JAW LENGTH, 11/16" JAW WIDTH, SIDE CUTTER NEEDLE NOSE HEAD, ALLOY STEEL HANDLE (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£13.65
Price with VAT:
£16.38
APEX TOOLS
CRESCENT TOOLS
CTK21SAEN
STANDARD SOCKET SET: 21 PC, 3/4" DRIVE, 7/8 TO 2" SOCKET 12 POINTS, CHROME (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£209.70
Price with VAT:
£251.64
APEX TOOLS
CRESCENT TOOLS
CLP5SETN-08
PLIER SETS, SET TYPE: LOCKING PLIERS , NUMBER OF PIECES: 5.000 , ADDITIONAL INFORMATION: 5", 6", 7", 9", 10", (MOQ=1, PKG QTY=1)
✓ IN STOCK!
£31.15
Price with VAT:
£37.39
APEX TOOLS
DANAHER TOOLS
KITHCBFP1314SSA
DISCONTINUED BY MANUFACTURER, BOLT KIT, HARDWARE, SWING BOLT, PIN ANCHORS, STEEL, 12 PIECE KIT
✓ IN STOCK!
£43.96
Price with VAT:
£52.75
