SEARCH NOW FOR ALL YOUR AUTOMOTION SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
AUTOMATION DIRECT
IRONHORSE
MTCP2-010-3BD18
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 10HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1800RPM, TEFC, NEMA 215T FR ...
£793.98
Price with VAT:
£952.78
AUTOMATION DIRECT
IRONHORSE
MTCP2-003-3BD36
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 3HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 3600RPM, TEFC, NEMA 182T FRA ...
£318.94
Price with VAT:
£382.73
AUTOMATION DIRECT
SURE MOTION
APB100MXL025B-312
TIMING PULLEY, ALUMINUM, 0.08IN MXL PITCH, 100 TOOTH, 2.546IN PITCH DIAMETER, 5/16IN BORE, HUB WITHOUT FLANGES, FOR USE WITH 1/4IN WIDE BELT
£38.27
Price with VAT:
£45.93
AUTOMATION DIRECT
IRONHORSE
ACN-40P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 1/2HP WITH 3-PHASE INPUT, 1/6HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYN ...
£385.73
Price with VAT:
£462.88
AUTOMATION DIRECT
IRONHORSE
ACN-21P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAM ...
£321.19
Price with VAT:
£385.43
AUTOMATION DIRECT
IRONHORSE
HMMP-32HR-22
IRONHORSE MANUAL MOTOR PROTECTOR, ROTARY, 22A, THERMAL OVERLOAD, 14-22A ADJUSTABLE, 286A INSTANTANEOUS TRIP RATING, 45MM FRAME.
£50.03
Price with VAT:
£60.03
AUTOMATION DIRECT
IRONHORSE
ACN-41P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 1HP WITH 3-PHASE INPUT, 1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAM ...
£393.24
Price with VAT:
£471.89
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-V4A
IRONHORSE GSD4A SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT/VOLTAGE, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA, INPUT VOLTAGE SIGNAL RANGE(S) OF 0-5 VDC, 0-250 VDC.
£79.55
Price with VAT:
£95.46
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSD4A-240-6C
IRONHORSE GSD4A SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1/2HP AT 90 VDC AND 1/4 TO 1HP AT 180 VDC, 6A, OPEN FRAME, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INP ...
£110.66
Price with VAT:
£132.79
AUTOMATION DIRECT
IRONHORSE
MTCP2-015-3BD12
IRONHORSE MTCP2 PREMIUM EFFICIENCY AC INDUCTION MOTOR, GENERAL PURPOSE, INVERTER RATED AND SEVERE DUTY, 15HP, 3-PHASE, 230/460 VAC, SUITABLE FOR 208 VAC AT 60 HZ, 1200RPM, TEFC, NEMA 284T FR ...
£1,385.34
Price with VAT:
£1,662.41
AUTOMATION DIRECT
IRONHORSE
ACNND-25P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 5HP WITH 3-PHASE INPUT, 2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTION ...
£379.73
Price with VAT:
£455.68
AUTOMATION DIRECT
IRONHORSE
ACN-4030
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 30HP WITH 3-PHASE INPUT, 15HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 5 FRAME, RS-485, INTEGRATED DYNAM ...
£1,455.13
Price with VAT:
£1,746.16
AUTOMATION DIRECT
IRONHORSE
ACN-20P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 1/2HP WITH 3-PHASE INPUT, 1/6HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYN ...
£316.69
Price with VAT:
£380.03
AUTOMATION DIRECT
IRONHORSE
HMMP-32HR-0.16
IRONHORSE MANUAL MOTOR PROTECTOR, ROTARY, 0.16A, THERMAL OVERLOAD, 0.1-0.16A ADJUSTABLE, 2.1A INSTANTANEOUS TRIP RATING, 45MM FRAME.
£42.78
Price with VAT:
£51.33
AUTOMATION DIRECT
IRONHORSE
HMX1-AUX31-F
IRONHORSE FIELD INSTALLABLE AUXILIARY CONTACT, FRONT MOUNT, (3) N.O./(1) N.C. CONTACT(S), 6A @ 120 VAC/0.55A @ 120 VDC, SCREW TERMINAL. FOR USE WITH HMC-9 TO HMC-150 CONTACTORS.
£12.01
Price with VAT:
£14.41
AUTOMATION DIRECT
IRONHORSE
ACN-4015
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 460 VAC, 15HP WITH 3-PHASE INPUT, 7-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 4 FRAME, RS-485, INTEGRATED DY ...
£1,102.42
Price with VAT:
£1,322.90
AUTOMATION DIRECT
IRONHORSE
ACN-232C
IRONHORSE PROGRAMMING/COMMUNICATION CABLE, 3.2FT/1M CABLE LENGTH, RS-232 (RJ45 8P8C) TO USB A. FOR USE WITH IRONHORSE ACN SERIES DRIVES.
£79.55
Price with VAT:
£95.46
AUTOMATION DIRECT
IRONHORSE
ACNND-4025
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 460 VAC, 25HP WITH 3-PHASE INPUT, 10HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 5 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OPTI ...
£838.26
Price with VAT:
£1,005.91
AUTOMATION DIRECT
IRONHORSE
ACNND-20P5
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE, NEMA 4X, 230 VAC, 1/2HP WITH 3-PHASE INPUT, 1/6HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 1 FRAME, RS-485, INTEGRATED DYNAMIC BRAKING. OP ...
£178.61
Price with VAT:
£214.33
AUTOMATION DIRECT
IRONHORSE
ACN-23P0
IRONHORSE ACN SERIES AC GENERAL PURPOSE DRIVE WITH DISCONNECT, NEMA 4X, 230 VAC, 3HP WITH 3-PHASE INPUT, 1-1/2HP WITH 1-PHASE INPUT, SVC, V/HZ OR TORQUE MODE, 2 FRAME, RS-485, INTEGRATED DYN ...
£439.02
Price with VAT:
£526.82
AUTOMATION DIRECT
SURE MOTION
APB48XL037B-312
TIMING PULLEY, ALUMINUM, 1/5IN XL PITCH, 48 TOOTH, 3.056IN PITCH DIAMETER, 5/16IN BORE, HUB WITHOUT FLANGES, FOR USE WITH 3/8IN WIDE BELT
£36.77
Price with VAT:
£44.13
AUTOMATION DIRECT
SURE MOTION
70MXL025PP
SUREMOTION TIMING BELT, 0.08IN MXL PITCH, 1/4IN WIDE, 70 TOOTH, 5.6IN PITCH LENGTH (CIRCUMFERENCE), POLYURETHANE, POLYESTER REINFORCED. PACKAGE OF 3.
£15.47
Price with VAT:
£18.56
AUTOMATION DIRECT
IRONHORSE
GSDA-AI-A
DISCONTINUED BY MANUFACTURER, IRONHORSE GSD SERIES ANALOG INPUT MODULE, 1-CHANNEL, CURRENT, ISOLATED, INPUT CURRENT SIGNAL RANGE(S) OF 4-20 MA.
£85.83
Price with VAT:
£103.00
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-R
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, BUILT-IN REVERSE, POTENTIOMETER INPUT, SCR ...
£306.74
Price with VAT:
£368.09
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 180 VDC, 1828RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£177.08
Price with VAT:
£212.50
AUTOMATION DIRECT
IRONHORSE
WG-175-040-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, HOLLOW, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 0.74HP AT 1.0 SF, 714 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANCE, CAST ...
£194.12
Price with VAT:
£232.94
AUTOMATION DIRECT
IRONHORSE
WG-175-060-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 0.38HP AT 1.0 SF, 469 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
£170.92
Price with VAT:
£205.10
AUTOMATION DIRECT
IRONHORSE
GSD3-240-3N4
IRONHORSE GSD3 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/50 TO 1/3HP AT 90 VDC AND 1/25 TO 2/3HP AT 180 VDC, 3A, NEMA 4, PANEL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPU ...
£143.00
Price with VAT:
£171.60
AUTOMATION DIRECT
IRONHORSE
MTPM-P25-1JK40
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/4HP, 12/24 VDC, 1732/3996RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£169.46
Price with VAT:
£203.35
AUTOMATION DIRECT
IRONHORSE
MTPM-P14-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/7HP, 90 VDC, 1740RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£175.32
Price with VAT:
£210.38
AUTOMATION DIRECT
IRONHORSE
WG-175-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 0.875IN DIAMETER OUTPUT SHAFT, NOMINAL 1.02HP AT 1.0 SF, 596 LB-IN MECHANICAL OUTPUT TORQUE, 1-3/4IN CENTER DISTANC ...
£172.63
Price with VAT:
£207.16
AUTOMATION DIRECT
IRONHORSE
WG-262-005-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 5:1 RATIO, NEMA 182TC INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 5.24HP AT 1.0 SF, 924 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
£264.50
Price with VAT:
£317.40
AUTOMATION DIRECT
IRONHORSE
MTPM-P50-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/2HP, 180 VDC, 1800RPM, TENV, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
£217.09
Price with VAT:
£260.51
AUTOMATION DIRECT
IRONHORSE
MTPM-002-1M18
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 2HP, 180 VDC, 1800RPM, TEFC, NEMA 56C FRAME, ROLLED STEEL, C-FACE/REMOVABLE RIGID BASE MOUNT. REPLACEMENT BRUSHES INCLUDED.
£559.39
Price with VAT:
£671.27
AUTOMATION DIRECT
IRONHORSE
MTGR-P05-1L132
IRONHORSE MTGR SERIES RIGHT ANGLE DUAL SHAFT DC GEAR MOTOR, 1/19HP, 90 VDC, 132RPM, 17 LB-IN FULL LOAD TORQUE, 0.67 FLA, 14.5:1 RATIO, 1/2IN SHAFT DIAMETER.
£340.38
Price with VAT:
£408.46
AUTOMATION DIRECT
IRONHORSE
MTGP-P20-1K018
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/5HP, 24 VDC, 18RPM, 280 LB-IN FULL LOAD TORQUE, 4.41 FLA, 110:1 RATIO, 5/8IN SHAFT DIAMETER.
£344.78
Price with VAT:
£413.74
AUTOMATION DIRECT
IRONHORSE
GSD7-120-1CR30
IRONHORSE GSD7 SERIES DC REVERSING DRIVE, 120 VAC, 1-PHASE, 1/15 TO 1/8HP AT 90 VDC, 1.2A, OPEN FRAME, PANEL MOUNT, BUILT-IN REVERSE, MAXIMUM 30 REVERSES/MINUTE, POTENTIOMETER INPUT, SCR OUT ...
£244.50
Price with VAT:
£293.40
AUTOMATION DIRECT
IRONHORSE
WG-262-060-H
IRONHORSE HEAVY-DUTY WORM GEARBOX, 60:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.4375IN DIAMETER OUTPUT SHAFT, NOMINAL 1.16HP AT 1.0 SF, 1670 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTANCE, ...
£377.79
Price with VAT:
£453.35
AUTOMATION DIRECT
IRONHORSE
WGA-63M-100-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 100:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 0.51HP AT 1.0 SF, 992 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, CA ...
£188.93
Price with VAT:
£226.72
AUTOMATION DIRECT
IRONHORSE
WGA-63M-020-H1
IRONHORSE MEDIUM-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, HOLLOW, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 2.06HP AT 1.0 SF, 1225 LB-IN MECHANICAL OUTPUT TORQUE, 63MM CENTER DISTANCE, CA ...
£225.24
Price with VAT:
£270.29
AUTOMATION DIRECT
SURE MOTION
DC-BRS20-16
SUREMOTION BORE REDUCER, CLAMPING, STAINLESS STEEL BODY, 1-1/4IN OUTSIDE DIAMETER, 1IN INSIDE DIAMETER.
£17.28
Price with VAT:
£20.74
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTPM-P04-1L17
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/26HP, 90 VDC, 1749RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£109.65
Price with VAT:
£131.58
Repair Yours
Contact Us
AUTOMATION DIRECT
IRONHORSE
MTGP-P14-1L165
IRONHORSE MTGP SERIES PARALLEL SHAFT DC GEAR MOTOR, 1/7HP, 90 VDC, 165RPM, 47 LB-IN FULL LOAD TORQUE, 1.57 FLA, 11:1 RATIO, 5/8IN SHAFT DIAMETER.
£300.07
Price with VAT:
£360.08
AUTOMATION DIRECT
IRONHORSE
GSD5-240-10N4-V
IRONHORSE GSD5 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10.8A, NEMA 4/12, WALL MOUNT, FIELD-INSTALL REVERSE, CURRENT, VOLTAGE OR ...
£346.25
Price with VAT:
£415.50
AUTOMATION DIRECT
IRONHORSE
GSD4-240-10N4X
IRONHORSE GSD4 SERIES DC GENERAL PURPOSE DRIVE, 120/240 VAC, 1-PHASE, 1/8 TO 1HP AT 90 VDC AND 1/4 TO 2HP AT 180 VDC, 10A, NEMA 4X, WALL MOUNT, FIELD-INSTALL REVERSE, POTENTIOMETER INPUT, SC ...
£286.73
Price with VAT:
£344.08
AUTOMATION DIRECT
IRONHORSE
MTPM-P13-1L19
IRONHORSE MTPM DC PERMANENT MAGNET MOTOR, SCR-PWM RATED, 1/8HP, 90 VDC, 1917RPM, TENV, SMALL FRAME, ROLLED STEEL, FLANGE MOUNT.
£123.83
Price with VAT:
£148.60
AUTOMATION DIRECT
IRONHORSE
WG-262-015-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 15:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 3.22HP AT 1.0 SF, 1577 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
£280.96
Price with VAT:
£337.15
AUTOMATION DIRECT
IRONHORSE
WG-262-040-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 40:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1.125IN DIAMETER OUTPUT SHAFT, NOMINAL 1.85HP AT 1.0 SF, 1919 LB-IN MECHANICAL OUTPUT TORQUE, 2-5/8IN CENTER DISTAN ...
£280.96
Price with VAT:
£337.15
AUTOMATION DIRECT
IRONHORSE
WG-206-020-R
IRONHORSE HEAVY-DUTY WORM GEARBOX, 20:1 RATIO, NEMA 56C INPUT, RIGHT HAND, 1IN DIAMETER OUTPUT SHAFT, NOMINAL 1.57HP AT 1.0 SF, 914 LB-IN MECHANICAL OUTPUT TORQUE, 2-1/16IN CENTER DISTANCE, ...
£188.19
Price with VAT:
£225.83
