SEARCH NOW FOR ALL YOUR DAYTON SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Motors/GearBox/Clutch / Gear Motor
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
GRAINGER
DAYTON
6K328C
AC GEAR MOTOR, 115VAC, 3.8A, 27RPM, 1 PH, TORQUE 275 IN-LBS
£288.04
Price with VAT:
£345.65
GRAINGER
DAYTON
4Z725
DISCONTINUED BY MANUFACTURER, PERMANET MAGNET DC GEAR MOTOR, 90 VDC, 0.83 AMP, 167:1 RATIO, 1/2 HP
£227.40
Price with VAT:
£272.88
GRAINGER
DAYTON
4Z722
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 1/8HP, 30:1 RATIO
£274.48
Price with VAT:
£329.38
GRAINGER
DAYTON
3XA90
AC GEAR MOTOR, 115/230V AC, 55 RPM, 130 INCH/POUND MAX TORQUE, 30:1 GEAR RATIO, 5/8" SHAFT DIAMETER, 1-1/5" SHAFT LENGTH, BALL BEARINGS, TOTALLY ENCLOSED FAN COOLED, CW/CCW, RIGHT ANGLE ORIE ...
£543.49
Price with VAT:
£652.19
GRAINGER
DAYTON
4Z382C
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR, 1.41/1.43 AMPS, 90/130 VDC, 1/8-1/6 HP, 64/97 RPM, 28.1:1 RATIO, 113 LB TORQUE
£300.07
Price with VAT:
£360.08
GRAINGER
DAYTON
2H565
DC GEARMOTOR 90VDC, NAMEPLATE RPM: 37, MAX. TORQUE: 150.0 IN.-LB., ENCLOSURE: TENV
£356.52
Price with VAT:
£427.82
GRAINGER
DAYTON
52JE20
AC GEARMOTOR, 115 NAMEPLATE, RPM 7.0 MAX., TORQUE 30.0 IN.-LB., ENCLOSURE OPEN
£65.95
Price with VAT:
£79.14
GRAINGER
DAYTON
71902455
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 115/230 VAC, 50/60 HZ, 0.6/1.3 AMP
£211.27
Price with VAT:
£253.52
GRAINGER
DAYTON
52JE04
AC GEARMOTOR, 115, NAMEPLATE, RPM: 50 MAX, TORQUE: 12.0 IN. LB, ENCLOSURE OPEN
£101.57
Price with VAT:
£121.89
GRAINGER
DAYTON
4Z518D
DISCONTINUED BY MANUFACTURER, AC GEARMOTOR, 115/230 VAC, 385 IN.-LB. OF TORQUE, HEAVY-DUTY NEEDLE ROLLER, ENCLOSED FAN-COOLED MOTOR, CAPACITOR IS INCLUDED
£607.19
Price with VAT:
£728.62
GRAINGER
DAYTON
2H577
GEAR MOTOR, PERMANENT MAGNET DC TYPE, 235 IN-LB MAX TORQUE, SINGLE SHAFT, 29:1 RATIO, 1/4 HP, 62 RPM, 2.51 AMP, 90 VDC, DIE CAST ALUMINUM
£523.02
Price with VAT:
£627.63
GRAINGER
DAYTON
6K506
AC GEAR MOTOR, 137 RPM, 1/2 HP, 7. AMP, 60HZ, 115VAC, 1PH, 215 IN-LB
£579.12
Price with VAT:
£694.94
GRAINGER
DAYTON
2H573
GEARMOTOR, 165RPM, 90VDC, 5/8" SHAFT DIA, 1-1/2" SHAFT LENGTH, 2.72A, 1/4HP, 10:6:1 RATIO
£585.94
Price with VAT:
£703.13
GRAINGER
DAYTON
52JD93
AC GEARMOTOR, 115 VAC, 1 PHASE, MAX TORQUE: 6 IN. LB, 50 RPM, 40 DEGREES C, 5-1/8 INCH LENGTH, SHAFT DIAMETER: 5/16 IN, GEAR RATIO: 69.2:1, REPLACES PART# 3M258
£72.77
Price with VAT:
£87.32
GRAINGER
DAYTON
52JE27
AC GEARMOTOR, 115V AC, 6.9 RPM, MAX. TORQUE 35.0 IN-LB, ENCLOSURE OPEN
£49.15
Price with VAT:
£58.98
Repair Yours
Contact Us
GRAINGER
DAYTON
453R96
AC GEAR MOTOR, 115VAC, RPM 105 MAX, TORQUE 20.0 IN-LB, SINGLE PHASE, SHAFT TYPE: SINGLE, TOTALLY ENCLOSED NON-VENTILATED, 60/50HZ, 1/25HP, GEAR RATIO: 15.9:1
£353.58
Price with VAT:
£424.30
GRAINGER
DAYTON
2Z803D
DISCONTINUED BY MANUFACTURER, AC/DC GEARMOTOR, 1.3 AMP, 1 PHASE, 115V AC/DC, 50/60 HZ, 1/15 HP, 100 RPM, 52:1 GEAR RATIO
£260.00
Price with VAT:
£312.00
GRAINGER
DAYTON
453R95
GEARMOTOR, INDUSTRIAL, RPM 60, TORQUE 30.0 IN-LB, 115V, TYPE PSC
£319.84
Price with VAT:
£383.81
GRAINGER
DAYTON
2Z814
DISCONTINUED BY MANUFACTURER, AC GEARMOTOR, 115V, NAMEPLATE RPM 30 MAX. TORQUE 7.5 IN-LB, ENCLOSURE OPEN
£66.36
Price with VAT:
£79.64
Repair Yours
Contact Us
GRAINGER
DAYTON
1MBG3
AC GEARMOTOR, 1.1 RPM, MAX. TORQUE 100.0 IN-LB, ENCLOSURE OPEN, 115V AC
£91.70
Price with VAT:
£110.04
Repair Yours
Contact Us
GRAINGER
DAYTON
6ML69
DISCONTINUED BY MANUFACTURER, GEARMOTOR, DC, 1/4HP, 2AMP, 90V, 165RPM
£619.40
Price with VAT:
£743.28
GRAINGER
DAYTON
1MBG7
AC GEARMOTOR: 368 RPM NAMEPLATE RPM, 3.3 IN-LB MAX. TORQUE, SINGLE, CW, ALL ANGLE
£101.97
Price with VAT:
£122.36
Repair Yours
Contact Us
GRAINGER
DAYTON
2H569
GEARMOTOR, DC, 90VDC, 5RPM, 160IN-LB MAX TORQUE, CW/CCW, ALL ANGLE, SHAFT LENGTH: 1IN, SHAFT DIA: 1/2IN
£437.37
Price with VAT:
£524.84
GRAINGER
DAYTON
6K3328
DISCONTINUED BY MANUFACTURER, AC GEAR MOTOR, 1/6 HP, 115 VOLTS, 60 HERTZ, 1 PHASE, 4.5 AMP, 100 TORQUE
£255.78
Price with VAT:
£306.94
GRAINGER
DAYTON
2H614
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 1 PHASE, 115/230 VAC, 2.3/1.2 AMPS, 12 RPM, 700 IN-LBS TORQUE, 60/50 HZ, 138:1 RATIO, 1/6 HP
£282.15
Price with VAT:
£338.58
GRAINGER
DAYTON
1LRB3
GEAR MOTOR, PERMANENT MAGNET, PARALLEL SHAFT, 90V DC, 90 RPM, 34 IN-LB MAX. TORQUE, CW/CCW, ALL ANGLE, 37:1 RATIO
£301.50
Price with VAT:
£361.80
GRAINGER
DAYTON
6Z912
GEARMOTOR: 90V DC, 9.6 RPM NAMEPLATE RPM, 100 IN-LB MAX. TORQUE, CW/CCW, ALL ANGLE, 1ST STAGE STEEL HELICAL; SUBSEQUENT STAGES STEEL OR HEAT-TREATED POWDERED METAL SPUR
£246.48
Price with VAT:
£295.78
GRAINGER
DAYTON
2L010
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR, PERMANENT AGNET DC GEAR MOTOR, 25 RPM, TORQUE: 20 INCHES PER POUND, 1/125 HP, 12 VDC, 1.3 AMPS, GEAR RATIO: 270:1
£40.22
Price with VAT:
£48.26
Repair Yours
Contact Us
GRAINGER
DAYTON
6K331D
AC MOTOR, 115 VAC, 1 PHASE, SINGLE GEARMOTOR SHAFT, 60 NAMEPLATE RPM, 60 HERTZ, 3.8 AMPS, 2 BRAKE DISCS REQUIRED
£328.63
Price with VAT:
£394.36
GRAINGER
DAYTON
52JE18
AC GEARMOTOR, 5.8 RPM NAMEPLATE RPM, 30 IN-LB MAX. TORQUE, SINGLE, CW, ALL ANGLE, MAGNETIC
£80.69
Price with VAT:
£96.83
Repair Yours
Contact Us
GRAINGER
DAYTON
DTN1LPU8
AC GEARMOTOR, 115/120 VAC, 36 RPM, 5-3/4 INCH
£227.79
Price with VAT:
£273.35
GRAINGER
DAYTON
1LPZ7A
DAYTON AC/DC GEARMOTOR: 55 RPM NAMEPLATE RPM, 39 IN-LB FULL LOAD TORQUE, 1, 100:1, OPEN, 115V AC/DC
£239.15
Price with VAT:
£286.98
GRAINGER
DAYTON
1LRA5A
DISCONTINUED BY MANUFACTURER, GEARMOTOR, 1.4 AMP, 115 VAC, 4.5 RPM, 1 PHASE, 50/60 HZ, 1/15 HP, 250 IN/LB TORQUE
£187.44
Price with VAT:
£224.93
GRAINGER
DAYTON
5K887D
DISCONTINUED BY MANUFACTURER, CARBONATOR PUMP MOTOR, SPLIT PHASE, 1/3 HP, 1725 & 1425 RPM, 115 / 230 VOLTS, 60 & 50 HZ, SINGLE PHASE, 1.0 SERVICE FACTOR, RESILIENT BASE MOUNTING, ODP ENCLOSU ...
£79.59
Price with VAT:
£95.51
GRAINGER
DAYTON
4Z520C
AC GEARMOTOR, 1 HP, 115/230 VAC, 60/50 HZ, 1.2/.63 AMP, 1 PHASE, 35:1 RATIO, 45 RPM, PARALLEL SHAFT ORIENTATION, FAN-COOLED, KEYED SHAFT, DIE CAST ALUMINUM HOUSING
£333.03
Price with VAT:
£399.64
GRAINGER
DAYTON
52JE35
PARALLEL, SINGLE OUTPUT SHAFT, PSC, OPEN, 100 RPM, 2 IN-LB MAX TORQUE, 115V AC
£73.36
Price with VAT:
£88.03
Repair Yours
Contact Us
GRAINGER
DAYTON
6Z908A
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, SHADED POLE, INPUT HP 1/85, VOLTAGE 115, HZ 50/60, RPM F/L 25, PHASE 1, TORQUE F/L 45 IN LBS, SHAFT 3/8 INCH DIAMETER, DUTY CONTINUOUS, AMBIENT 40`C ...
£62.57
Price with VAT:
£75.08
Repair Yours
Contact Us
GRAINGER
DAYTON
1LPU4
AC GEARMOTOR, PARALLEL, 1 OUTPUT SHAFT, SPLIT-PHASE, 62 RPM, 115 VAC, 28:1 INVERTER RATING
£507.63
Price with VAT:
£609.16
GRAINGER
DAYTON
453R94
GEAR MOTOR, PARALLEL, SINGLE OUTPUT SHAFT, PSC, TENV, 29RPM, 115VAC, 50IN-LB MAX TORQUE
£300.17
Price with VAT:
£360.20
GRAINGER
DAYTON
52JE31
GEAR MOTOR, PARALLEL, SINGLE OUTPUT SHAFT, SHADED POLE, OPEN 35 PRM, 8.3 IN-LB MAX TORGUE, 36.8:1 GEAR RATION, 115V, AC
£51.35
Price with VAT:
£61.62
Repair Yours
Contact Us
GRAINGER
DAYTON
1LPU9
DAYTON AC GEARMOTOR: PARALLEL, SINGLE OUTPUT SHAFT, PSC, TENV, 68 RPM, 30 IN-LB MAX TORQUE, CW/CCW
£308.10
Price with VAT:
£369.72
GRAINGER
DAYTON
021Q607-2167
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR, 1/20 HP, 90V, .75A, 161:1 RATIO, 10RPM, 200 IN-LBS TORQUE, F3 INSULATION CLASS
£359.34
Price with VAT:
£431.21
GRAINGER
DAYTON
4Z725A
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR, 1/12 HP, 90V, .83A, 9.9RPM, 228 IN-LBS TORQUE
£370.12
Price with VAT:
£444.14
GRAINGER
DAYTON
6Z081B
AC GEARMOTOR, PARALLEL, SINGLE OUTPUT, SHAFT, PSC, TENV, 17 RPM, 100 IN-LB MAX TORQUE, 115V AC
£243.02
Price with VAT:
£291.62
GRAINGER
DAYTON
1XFY5
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, RIGHT ANGLE, 1/12 INPUT HP, 55 IN-LB TORQUE, 43 RPM, 40:1 RATIO, 1-PHASE, 115 V, 1.3 A, 60 HZ, CONT. DUTY
£682.21
Price with VAT:
£818.65
GRAINGER
DAYTON
4Z839
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR / PERMANENT MAGNET, CONTINUOUS DUTY, CLASS A, 25 DEGREE C MAX, 15 IN-LB, RATIO / 95.7:1, 1/160 HP, 25 RPM, 1.25 AMP DC, 12 VDC
£38.29
Price with VAT:
£45.94
Repair Yours
Contact Us
GRAINGER
DAYTON
4Z519C
DISCONTINUED BY MANUFACTURER, AC GEARMOTOR, 115/230 V, 1.2/0.63 A, 30/25 RPM, 53:1 RATIO, 1 PHASE, 50/60 HZ
£232.09
Price with VAT:
£278.50