Product Search

    SEARCH NOW FOR ALL YOUR DREMEL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 182.
    DREMEL 505

    DREMEL

    505

    MOUNTED FLAP WHEEL: 3/16" DIA, 120 GRIT, ALUMINUM OXIDE 1/8" SHANK DIA, COATED, FINE GRADE (MOQ=1, PKG QTY=1)
    £15.92 Price with VAT: £19.10 Buy Surplus As Low As £3.45 Price with VAT: £4.14
    £3.45 Price with VAT: £4.14
    DREMEL 5090930

    DREMEL

    5090930

    (PRICE/PR); MOTOR BRUSHES
    £4.82 Price with VAT: £5.79 Buy Surplus As Low As £2.89 Price with VAT: £3.47
    £2.89 Price with VAT: £3.47
    DREMEL 511E

    DREMEL

    511E

    ABRASIVE BUFF: USE WITH DREMEL ROTARY TOOL (MOQ=1, PKG QTY=2)
    £12.89 Price with VAT: £15.46 Buy Surplus As Low As £8.34 Price with VAT: £10.01
    £8.34 Price with VAT: £10.01
    DREMEL 532

    DREMEL

    532

    DWOS REPLACED BY 114-532-02
    Buy Surplus As Low As £3.64 Price with VAT: £4.37
    £3.64 Price with VAT: £4.37
    DREMEL 535

    DREMEL

    535

    (PRICE/PK OF 2), BRASS BRUSH, 19.1MM, PK2; PRODUCT RANGE:-; SVHC:NO SVHC (15-JUN-2015); ACCESSORY TYPE:BRASS BRUSH; FOR USE WITH:CLEANING AND SURFACE FINISHING OF GOLD, BRONZE, COPPER OR BRA ...
    £18.19 Price with VAT: £21.83 Buy Surplus As Low As £11.37 Price with VAT: £13.64
    £11.37 Price with VAT: £13.64
    DREMEL 537

    DREMEL

    537

    BRASS BRUSH-END SHAPE
    £4.02 Price with VAT: £4.82 Buy Surplus As Low As £2.41 Price with VAT: £2.89
    £2.41 Price with VAT: £2.89
    DREMEL 7105

    DREMEL

    7105

    MOUNTED POINT: 1/8" SHANK DIA TEAL, DIAMOND, 0.4" SHANK LENGTH (MOQ=1, PKG QTY=1)
    £18.19 Price with VAT: £21.83 Buy Surplus As Low As £11.37 Price with VAT: £13.64
    £11.37 Price with VAT: £13.64
    DREMEL 72064

    DREMEL

    72064

    POWER PAK F/2520-2725 SKIL
    £52.30 Price with VAT: £62.76 Buy Surplus As Low As £31.84 Price with VAT: £38.20
    £31.84 Price with VAT: £38.20
    DREMEL 801

    DREMEL

    801

    CARBIDE SHAPING WHEEL
    £16.68 Price with VAT: £20.01 Buy Surplus As Low As £10.61 Price with VAT: £12.73
    £10.61 Price with VAT: £12.73
    DREMEL 83322

    DREMEL

    83322

    MOUNTED POINT: 11/32" THICK, 1/8" SHANK DIA, (MOQ=1, PKG QTY=1)
    £8.34 Price with VAT: £10.01 Buy Surplus As Low As £5.00 Price with VAT: £6.00
    £5.00 Price with VAT: £6.00
    DREMEL 83702

    DREMEL

    83702

    MOUNTED POINT: 1/4" THICK, 1/8" SHANK DIA, (MOQ=1, PKG QTY=1)
    £8.34 Price with VAT: £10.01 Buy Surplus As Low As £5.00 Price with VAT: £6.00
    £5.00 Price with VAT: £6.00
    DREMEL 85422

    DREMEL

    85422

    MOUNTED POINT: 1/8" THICK, 1/8" SHANK DIA, (MOQ=1, PKG QTY=1)
    £8.34 Price with VAT: £10.01 Buy Surplus As Low As £1.72 Price with VAT: £2.07
    £1.72 Price with VAT: £2.07
    DREMEL 90929

    DREMEL

    90929

    CARBON BRUSHES F/275-285& 395 MOTO TOOLS
    £4.02 Price with VAT: £4.82 Buy Surplus As Low As £2.41 Price with VAT: £2.89
    £2.41 Price with VAT: £2.89
    DREMEL 941

    DREMEL

    941

    MOUNTED POINT: 5/8" THICK, 1/8" SHANK DIA, B41, (MOQ=1, PKG QTY=1)
    £8.34 Price with VAT: £10.01 Buy Surplus As Low As £1.72 Price with VAT: £2.07
    £1.72 Price with VAT: £2.07
    DREMEL 9903

    DREMEL

    9903

    TUNGSTEN CARBIDE HIGH SPEED CUTTER 1/8” DIAMETER WITH 1/8” SHANK
    £15.16 Price with VAT: £18.19 Buy Surplus As Low As £5.31 Price with VAT: £6.37
    £5.31 Price with VAT: £6.37
    DREMEL 9904

    DREMEL

    9904

    ABRASIVE BUR: CYLINDER WITH RADIUS 1/8" SHANK (MOQ=1, PKG QTY=1)
    £18.19 Price with VAT: £21.83 Buy Surplus As Low As £11.37 Price with VAT: £13.64
    £11.37 Price with VAT: £13.64
    DREMEL BE400

    DREMEL

    BE400

    (PRICE/ST, 4EA/ST); BEARING ENLARGER ASSORTMENT (4 PCS.)
    £38.66 Price with VAT: £46.39 Buy Surplus As Low As £23.50 Price with VAT: £28.20
    £23.50 Price with VAT: £28.20
    DREMEL EZ456B-01

    DREMEL

    EZ456B-01

    CUTOFF WHEEL: 1-1/2" DIA, 0.045" THICK, 1-1/2" HOLE, ALUMINUM OXIDE REINFORCED, 35,000 MAX RPM, USE WITH ANGLE GRINDERS (MOQ=1, PKG QTY=12)
    £50.79 Price with VAT: £60.94 Buy Surplus As Low As £31.08 Price with VAT: £37.29
    £31.08 Price with VAT: £37.29
    DREMEL EZ471SA

    DREMEL

    EZ471SA

    BRUSH: USE WITH EZ402 OR 402 MANDRELS INCLUDES (1) BLADE (MOQ=1, PKG QTY=1)
    £20.47 Price with VAT: £24.56 Buy Surplus As Low As £12.89 Price with VAT: £15.46
    £12.89 Price with VAT: £15.46
    DREMEL EZ472SA

    DREMEL

    EZ472SA

    BRUSH: USE WITH EZ402 OR 402 MANDRELS USE WITH EZ402 OR 402 MANDRELS (MOQ=1, PKG QTY=1)
    £12.13 Price with VAT: £14.55 Buy Surplus As Low As £7.28 Price with VAT: £8.73
    £7.28 Price with VAT: £8.73
    DREMEL EZ473SA

    DREMEL

    EZ473SA

    BRUSH: USE WITH EZ402 OR 402 MANDRELS USE WITH EZ402 OR 402 MANDRELS (MOQ=1, PKG QTY=1)
    £12.13 Price with VAT: £14.55 Buy Surplus As Low As £7.28 Price with VAT: £8.73
    £7.28 Price with VAT: £8.73
    DREMEL 111

    DREMEL

    111

    ABRASIVE BUR: CYLINDER 1/8" SHANK (MOQ=1, PKG QTY=1)
    £6.17 Price with VAT: £7.40 Buy Surplus As Low As £4.00 Price with VAT: £4.80
    £4.00 Price with VAT: £4.80
    DREMEL 710-08

    DREMEL

    710-08

    DREMEL ACCESSORY KIT: USE WITH ALL CORDED & CORDLESS DREMEL ULTRA-SAWS & CORDED ROTOZIP INCLUDES 1 TO 8" BIT, ALUMINUM OXIDE GRINDING STONES, CARBON STEEL BRUSH, DRESSING STONE, DRUM SANDER, ...
    £64.43 Price with VAT: £77.32 Buy Surplus As Low As £38.66 Price with VAT: £46.39
    £38.66 Price with VAT: £46.39
    DREMEL EZ406-02

    DREMEL

    EZ406-02

    1/3" HOLE, BOW TIE MANDREL KIT 1-1/2" OAL, 1/8" SHANK DIAM (MOQ=1, PKG QTY=1)
    £31.84 Price with VAT: £38.20 Buy Surplus As Low As £19.71 Price with VAT: £23.65
    £19.71 Price with VAT: £23.65
    DREMEL 442-02

    DREMEL

    442-02

    CARBON STEEL CUP WIRE BRUSHES, CUP BRUSH: 1/2" DIA, STEEL, CRIMPED
    £10.61 Price with VAT: £12.73 Buy Surplus As Low As £6.37 Price with VAT: £7.64
    £6.37 Price with VAT: £7.64
    DREMEL 532-02

    DREMEL

    532-02

    END BRUSHES: 1/8" DIA, STAINLESS STEEL, FLAT FACED WIRE 3 MM SHANK DIA, 15,000 MAX RPM (MOQ=1, PKG QTY=2)
    £12.89 Price with VAT: £15.46 Buy Surplus As Low As £8.34 Price with VAT: £10.01
    £8.34 Price with VAT: £10.01
    DREMEL 535-02

    DREMEL

    535-02

    3/4" OD, 1/8" SHANK DIAM, STRAIGHT FILAMENT BRASS WHEEL BRUSH 1/16" FACE WIDTH, 3/4" TRIM LENGTH, 15,000 RPM (MOQ=2, PKG QTY=2)
    £15.16 Price with VAT: £18.19 Buy Surplus As Low As £9.10 Price with VAT: £10.92
    £9.10 Price with VAT: £10.92
    DREMEL 536-02

    DREMEL

    536-02

    END BRUSHES: 1/2" DIA, BRASS, FLAT FACED WIRE 3 MM SHANK DIA, 15,000 MAX RPM (MOQ=1, PKG QTY=2)
    £12.89 Price with VAT: £15.46 Buy Surplus As Low As £8.34 Price with VAT: £10.01
    £8.34 Price with VAT: £10.01
    DREMEL 537-02

    DREMEL

    537-02

    1/8" DIAM BRASS FLAT FACED END BRUSH 1/8" SHANK DIAM, 15,000 MAX RPM (MOQ=1, PKG QTY=2)
    £13.64 Price with VAT: £16.37 Buy Surplus As Low As £8.34 Price with VAT: £10.01
    £8.34 Price with VAT: £10.01
    DREMEL 401792

    DREMEL

    401792

    3000ROTARY TOOL 1ATACH/24ACC
    £110.67 Price with VAT: £132.80 Buy Surplus As Low As £66.70 Price with VAT: £80.05
    £66.70 Price with VAT: £80.05
    DREMEL 424

    DREMEL

    424

    SCREW MANDREL
    Buy Surplus As Low As £3.64 Price with VAT: £4.37
    £3.64 Price with VAT: £4.37
    DREMEL 8100-N/21

    DREMEL

    8100-N/21

    DISCONTINUED BY MANUFACTURER, CORDLESS ROTARY TOOL KIT, 8.0V MAX, 22 PCS,REPLACED WITH PART# 7760-N/10
    Buy Surplus As Low As £84.14 Price with VAT: £100.97
    £84.14 Price with VAT: £100.97
    DREMEL 2615302973

    DREMEL

    2615302973

    BEARING SEAT ASSY
    Buy Surplus As Low As £25.01 Price with VAT: £30.02
    £25.01 Price with VAT: £30.02
    DREMEL MM30-04

    DREMEL

    MM30-04

    OSCILLATING TOOL KITS
    Buy Surplus As Low As £150.09 Price with VAT: £180.10
    £150.09 Price with VAT: £180.10
    DREMEL 2610009839

    DREMEL

    2610009839

    SHAFT LOCK ASSEMBLY
    Buy Surplus As Low As £3.18 Price with VAT: £3.82
    £3.18 Price with VAT: £3.82
    DREMEL 2615297356

    DREMEL

    2615297356

    LOCK BIN ASSEMBLY
    Buy Surplus As Low As £3.18 Price with VAT: £3.82
    £3.18 Price with VAT: £3.82
    DREMEL 2615294309

    DREMEL

    2615294309

    COUPLING
    Buy Surplus As Low As £2.27 Price with VAT: £2.73
    £2.27 Price with VAT: £2.73
    DREMEL 545 DIAMOND CUT WHEEL

    DREMEL

    545 DIAMOND CUT WHEEL

    545 DIAMOND CUTTING WHEEL (22MM), 20PCS, CUTTING WHEEL CUT OFF DISCS, COATED ROTARY TOOLS, FOR DREM ROTARY TOOLS
    £42.58 Price with VAT: £51.10 Buy Surplus As Low As £25.26 Price with VAT: £30.32
    £25.26 Price with VAT: £30.32
    DREMEL 7760-N-10

    DREMEL

    7760-N-10

    3.6V TRAPPED BLISTER CL RT KIT
    Call for Availability
    DREMEL HCFC2103

    DREMEL

    HCFC2103

    DRILL BIT, BULLDOG XTREME HAMMER DRILL BIT 5/8"X10"X12"
    £15.92 Price with VAT: £19.10 Buy Surplus As Low As £9.85 Price with VAT: £11.82
    £9.85 Price with VAT: £11.82
    DREMEL B814-01

    DREMEL

    B814-01

    DISCONTINUED BY MANUFACTURER, DREMEL B814-01 2.0AH 12VMAX LITHIUM-ION BATTERY
    £73.53 Price with VAT: £88.23 Buy Surplus As Low As £44.72 Price with VAT: £53.67
    £44.72 Price with VAT: £53.67
    DREMEL 290-02

    DREMEL

    290-02

    ENGRAVER KIT, 120VAC, INCLUDES 1 EA.CARBIDE PT.
    £34.87 Price with VAT: £41.84 Buy Surplus As Low As £20.47 Price with VAT: £24.56
    £20.47 Price with VAT: £24.56
    DREMEL 8220-2/28

    DREMEL

    8220-2/28

    DISCONTINUED BY MANUFACTURER, CORDLESS HIGH PERFORMANCE ROTARY TOOL, 2 ATTACHMENTS, 28 ACCESSORIES
    Buy Surplus As Low As £227.40 Price with VAT: £272.88
    £227.40 Price with VAT: £272.88
    DREMEL EZ411SA

    DREMEL

    EZ411SA

    SANDING DISC: USE WITH DREMEL ROTARY TOOL INCLUDES (5) COARSE 60 GRIT SANDING DISC (MOQ=1, PKG QTY=5)
    £10.61 Price with VAT: £12.73 Buy Surplus As Low As £6.37 Price with VAT: £7.64
    £6.37 Price with VAT: £7.64
    DREMEL 709-02

    DREMEL

    709-02

    110 PIECE ALUMINUM OXIDE & SILICON CARBIDE STONE KIT
    £34.11 Price with VAT: £40.93 Buy Surplus As Low As £20.47 Price with VAT: £24.56
    £20.47 Price with VAT: £24.56
    DREMEL 26150880JA

    DREMEL

    26150880JA

    12V LI-ION BATTERY PACK (880), W/ 2AH FOR INCREASED CAPACITY, FOR USE WITH THE DREMEL 8200 / DREMEL 8220 CORDLESS MULTI-TOOL AND 8300 CORDLESS MULTI-MAX
    £70.00 Price with VAT: £84.00 Buy Surplus As Low As £42.00 Price with VAT: £50.40
    £42.00 Price with VAT: £50.40
    DREMEL 395

    DREMEL

    395

    DISCONTINUED BY MANUFACTURER, ROTARY TOOL, VARIABLE-SPEED, MULTIPRO
    Buy Surplus As Low As £68.22 Price with VAT: £81.86
    £68.22 Price with VAT: £81.86
    DREMEL 409

    DREMEL

    409

    CUTOFF WHEEL: 15/16" DIA, 0.025" THICK, 1/8" HOLE (MOQ=1, PKG QTY=36)
    £15.16 Price with VAT: £18.19 Buy Surplus As Low As £9.10 Price with VAT: £10.92
    £9.10 Price with VAT: £10.92
    DREMEL 420

    DREMEL

    420

    CUTOFF WHEEL: 15/16" DIA, 0.04" THICK, 1/8" HOLE 30,000 MAX RPM, USE WITH ANGLE GRINDERS (MOQ=1, PKG QTY=20)
    £15.16 Price with VAT: £18.19 Buy Surplus As Low As £9.10 Price with VAT: £10.92
    £9.10 Price with VAT: £10.92
    DREMEL 426

    DREMEL

    426

    CUTOFF WHEEL: 1-1/4" DIA, 0.045" THICK, 1/16" HOLE REINFORCED, 35,000 MAX RPM, USE WITH ANGLE GRINDERS (MOQ=1, PKG QTY=5)
    £18.19 Price with VAT: £21.83 Buy Surplus As Low As £11.37 Price with VAT: £13.64
    £11.37 Price with VAT: £13.64
    Previous Next
    1 2 3 4