SEARCH NOW FOR ALL YOUR GRAINGER SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Motors/GearBox/Clutch / Gear Motor
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
GRAINGER
DAYTON
1XFY5
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, RIGHT ANGLE, 1/12 INPUT HP, 55 IN-LB TORQUE, 43 RPM, 40:1 RATIO, 1-PHASE, 115 V, 1.3 A, 60 HZ, CONT. DUTY
£668.20
Price with VAT:
£801.84
GRAINGER
DAYTON
453R94
GEAR MOTOR, PARALLEL, SINGLE OUTPUT SHAFT, PSC, TENV, 29RPM, 115VAC, 50IN-LB MAX TORQUE
£294.01
Price with VAT:
£352.81
GRAINGER
DAYTON
4Z520C
AC GEARMOTOR, 1 HP, 115/230 VAC, 60/50 HZ, 1.2/.63 AMP, 1 PHASE, 35:1 RATIO, 45 RPM, PARALLEL SHAFT ORIENTATION, FAN-COOLED, KEYED SHAFT, DIE CAST ALUMINUM HOUSING
£326.19
Price with VAT:
£391.43
GRAINGER
DAYTON
5K887D
DISCONTINUED BY MANUFACTURER, CARBONATOR PUMP MOTOR, SPLIT PHASE, 1/3 HP, 1725 & 1425 RPM, 115 / 230 VOLTS, 60 & 50 HZ, SINGLE PHASE, 1.0 SERVICE FACTOR, RESILIENT BASE MOUNTING, ODP ENCLOSU ...
£77.96
Price with VAT:
£93.55
GRAINGER
DAYTON
2L010
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR, PERMANENT AGNET DC GEAR MOTOR, 25 RPM, TORQUE: 20 INCHES PER POUND, 1/125 HP, 12 VDC, 1.3 AMPS, GEAR RATIO: 270:1
£39.39
Price with VAT:
£47.27
Repair Yours
Contact Us
GRAINGER
DAYTON
6K3328
DISCONTINUED BY MANUFACTURER, AC GEAR MOTOR, 1/6 HP, 115 VOLTS, 60 HERTZ, 1 PHASE, 4.5 AMP, 100 TORQUE
£250.53
Price with VAT:
£300.63
GRAINGER
DAYTON
2H569
GEARMOTOR, DC, 90VDC, 5RPM, 160IN-LB MAX TORQUE, CW/CCW, ALL ANGLE, SHAFT LENGTH: 1IN, SHAFT DIA: 1/2IN
£428.39
Price with VAT:
£514.07
GRAINGER
DAYTON
2Z814
DISCONTINUED BY MANUFACTURER, AC GEARMOTOR, 115V, NAMEPLATE RPM 30 MAX. TORQUE 7.5 IN-LB, ENCLOSURE OPEN
£65.00
Price with VAT:
£78.00
Repair Yours
Contact Us
GRAINGER
DAYTON
52JD93
AC GEARMOTOR, 115 VAC, 1 PHASE, MAX TORQUE: 6 IN. LB, 50 RPM, 40 DEGREES C, 5-1/8 INCH LENGTH, SHAFT DIAMETER: 5/16 IN, GEAR RATIO: 69.2:1, REPLACES PART# 3M258
£71.27
Price with VAT:
£85.53
GRAINGER
DAYTON
2H573
GEARMOTOR, 165RPM, 90VDC, 5/8" SHAFT DIA, 1-1/2" SHAFT LENGTH, 2.72A, 1/4HP, 10:6:1 RATIO
£573.91
Price with VAT:
£688.69
GRAINGER
DAYTON
6K506
AC GEAR MOTOR, 137 RPM, 1/2 HP, 7. AMP, 60HZ, 115VAC, 1PH, 215 IN-LB
£567.22
Price with VAT:
£680.67
GRAINGER
DAYTON
2H577
GEAR MOTOR, PERMANENT MAGNET DC TYPE, 235 IN-LB MAX TORQUE, SINGLE SHAFT, 29:1 RATIO, 1/4 HP, 62 RPM, 2.51 AMP, 90 VDC, DIE CAST ALUMINUM
£512.28
Price with VAT:
£614.74
GRAINGER
DAYTON
4Z518D
DISCONTINUED BY MANUFACTURER, AC GEARMOTOR, 115/230 VAC, 385 IN.-LB. OF TORQUE, HEAVY-DUTY NEEDLE ROLLER, ENCLOSED FAN-COOLED MOTOR, CAPACITOR IS INCLUDED
£594.72
Price with VAT:
£713.66
GRAINGER
GRAINGER APPROVED VENDOR
6A180
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 115 NAMEPLATE RPM ,120 ENCLOSURE ENCLOSED, 1.3 TORQUE
£138.09
Price with VAT:
£165.71
GRAINGER
DAYTON
52JE04
AC GEARMOTOR, 115, NAMEPLATE, RPM: 50 MAX, TORQUE: 12.0 IN. LB, ENCLOSURE OPEN
£99.49
Price with VAT:
£119.38
GRAINGER
DAYTON
52JE20
AC GEARMOTOR, 115 NAMEPLATE, RPM 7.0 MAX., TORQUE 30.0 IN.-LB., ENCLOSURE OPEN
£64.59
Price with VAT:
£77.51
GRAINGER
DAYTON
3XA90
AC GEAR MOTOR, 115/230V AC, 55 RPM, 130 INCH/POUND MAX TORQUE, 30:1 GEAR RATIO, 5/8" SHAFT DIAMETER, 1-1/5" SHAFT LENGTH, BALL BEARINGS, TOTALLY ENCLOSED FAN COOLED, CW/CCW, RIGHT ANGLE ORIE ...
£532.33
Price with VAT:
£638.80
GRAINGER
DAYTON
4Z722
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 1/8HP, 30:1 RATIO
£268.84
Price with VAT:
£322.61
GRAINGER
DAYTON
4Z725
DISCONTINUED BY MANUFACTURER, PERMANET MAGNET DC GEAR MOTOR, 90 VDC, 0.83 AMP, 167:1 RATIO, 1/2 HP
£222.73
Price with VAT:
£267.28
GRAINGER
DAYTON
6K328C
AC GEAR MOTOR, 115VAC, 3.8A, 27RPM, 1 PH, TORQUE 275 IN-LBS
£282.13
Price with VAT:
£338.55
GRAINGER
GRAINGER APPROVED VENDOR
P55RR428
GEAR MOTOR 3PH 1/3HP 1725R 60HZ 230/460V
£668.20
Price with VAT:
£801.84
GRAINGER
DAYTON
2Z797
DISCONTINUED BY MANUFACTURER, GEARMOTOR, RIGHT ANGLE, 250 IN-LBS / 44 N MM, 1/15 HP, 4.0 RPM, GEAR RATIO: 1787:1, 1.3 AMP, SINGLE PHASE, 115 VAC/DC, 50/60 HZ
£250.31
Price with VAT:
£300.37
GRAINGER
DAYTON
1MBG3
AC GEARMOTOR, 1.1 RPM, MAX. TORQUE 100.0 IN-LB, ENCLOSURE OPEN, 115V AC
£91.70
Price with VAT:
£110.04
Repair Yours
Contact Us
GRAINGER
DAYTON
6K351
GEARMOTOR, 1/4 HP, 12 RPM, 60HZ, 115 VAC, 143:1, 1 PHASE
£910.37
Price with VAT:
£1,092.44
GRAINGER
DAYTON
6Z417
DC GEARMOTOR, 90 VDC, NAMEPLATE RPM: 90 RPM, MAX. TORQUE: 305.0 IN-LB, ENCLOSURE: TEFC
£677.09
Price with VAT:
£812.51
GRAINGER
DAYTON
6Z915
DC GEARMOTOR, 90VDC, NAMEPLATE RPM: 71 RPM, MAX. TORQUE: 40.0 IN-LB, ENCLOSURE: TENV
£341.85
Price with VAT:
£410.22
GRAINGER
DAYTON
3M328
GEAR MOTOR, TEFC, SHADED POLE, SINGLE PARALLEL SHAFT, 5/8IN SHAFT DIAMETER, 200IN-LB TORQUE, 1/20HP, 14RPM MAX, 115VAC, 60HZ, DIE-CAST ALUMINUM HOUSING, HARDENED STEEL GEAR
£447.48
Price with VAT:
£536.98
GRAINGER
DAYTON
6Z074
GEARMOTOR, 2.3RPM, 702:1 RATIO, 1/80HP, 115VAC, 50/60HZ, 1PHASE
£258.03
Price with VAT:
£309.64
GRAINGER
DAYTON
2H561
DC GEARMOTOR, 139 RPM, 90 VDC, 1/10 HP, NAMEPLATE RPM, 42 IN-LB MAX. TORQUE, CW/CCW, ALL ANGLE
£423.27
Price with VAT:
£507.92
GRAINGER
DAYTON
1LPZ9
GEAR MOTOR, 1/15 HP, 229:1 RATIO, 115 VAC/DC, 24 RPM, 1.3 FLA, 85 IN-LB TORQUE, SINGLE RIGHT ANGLE SHAFT, 50/60 HZ, 1.3 A, 1/2 INCH SHAFT DIAMETER
£257.48
Price with VAT:
£308.98
GRAINGER
DAYTON
4Z538
GEAR MOTOR 50RPM 1/30HP .42AMP 90VDC
£96.83
Price with VAT:
£116.20
Repair Yours
Contact Us
GRAINGER
DAYTON
6Z412
GEARMOTOR, DC, 90 VDC, 148 RPM, 101.0 IN-LB, TENV ENCLOSURE, 1/4 HP, 2.75 AMP
£350.86
Price with VAT:
£421.03
GRAINGER
DAYTON
4Z721
GEAR MOTOR 1/8HP 29RPM 60:1RATIO 115VAC 60HZ 1PH
£316.90
Price with VAT:
£380.28
GRAINGER
DAYTON
6K331
GEAR MOTOR, 0.167 HP, 150 IN-LB TORQUE, PARALLEL SHAFT, 5/8" OUTPUT SHAFT, 28:1 GEAR RATIO, SINGLE-PHASE, 115 VAC, 3.8 A, 60 HZ, CW/CCW, TOTALLY ENCLOSED FAN-COOLED, DIE CAST ALUMINUM HOUSIN ...
£599.18
Price with VAT:
£719.02
GRAINGER
DAYTON
4Z518
AC GEARMOTOR, PARALLEL, SINGLE OUTPUT SHAFT, PSC, TEFC, 15 RPM, 202 IN-LB MAX TORQUE, CW/CCW
£426.94
Price with VAT:
£512.33
GRAINGER
DAYTON
3M097
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 50 RPM, 115 V AC, 50/60 HZ, 66:1 RATIO
£139.29
Price with VAT:
£167.15
GRAINGER
DAYTON
1L517
GEAR MOTOR AC, 95RPM, 230V, 30 IN-KV NAX TORQUE, SINGLE OUTPUT SCHAFT, PSC, TENV
£308.10
Price with VAT:
£369.72
GRAINGER
DAYTON
3M257
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 25RPM, 115V, 60HZ, 13IN-LBS
£96.83
Price with VAT:
£116.20
Repair Yours
Contact Us
GRAINGER
DAYTON
4Z724A
DISCONTINUED BY MANUFACTURER, DC GEAR MOTOR, 275:1 RATIO, 1/12 HP, 6 RPM, TENV ENCLOSURE
£359.34
Price with VAT:
£431.21
GRAINGER
DAYTON
4Z537A
DISCONTINUED BY MANUFACTURER, DC GEARMOTOR, NAMEPLATE RPM: 32, ENCLOSURE: TENV, VOLTAGE 90VDC, SINGLE SHAFT, PARALLEL ORINTATION, INPUT HP 1/30, GEAR RATIO 98.1, FULL LOAD AMPS 0.42
£203.76
Price with VAT:
£244.51
GRAINGER
DAYTON
2Z800D
DISCONTINUED BY MANUFACTURER, GEAR MOTOR AC/DC, 1.3 AMP, 115 V, 50/60 HZ, 1/15 HP, 21 RPM, ENCLOSED, OPEN VENTED, RIGHT ANGLE
£123.63
Price with VAT:
£148.36
GRAINGER
DAYTON
6ML69
DISCONTINUED BY MANUFACTURER, GEARMOTOR, DC, 1/4HP, 2AMP, 90V, 165RPM
£619.40
Price with VAT:
£743.28
GRAINGER
DAYTON
1LPN2
AC GEARMOTOR: 13 RPM NAMEPLATE RPM, 113 IN-LB MAX. TORQUE, SINGLE, CW, ALL ANGLE, 115V AC
£248.04
Price with VAT:
£297.65
GRAINGER
DAYTON
5K934
DISCONTINUED BY MANUFACTURER, GEAR MOTOR, 144:1 RATIO, 1/4 HP, 12 RPM, 115 V
£427.82
Price with VAT:
£513.38
GRAINGER
DAYTON
6K352
AC GEARMOTOR, 115 VAC, 3/4 IN SHAFT, 500 IN-LB TORQUE, 27 RPM, 64:1 RATIO, 1/4 HP
£347.71
Price with VAT:
£417.25
