Product Search

    SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Machine Parts / Assembly for Machine

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 145.
    KENNAMETAL CP1638507

    KENNAMETAL

    CP1638507

    DISCONTINUED BY MANUFACTURER, COUNTERSINKING TOOL
    ✓ IN STOCK!
    Buy Surplus As Low As £85.68 Price with VAT: £102.81
    £85.68 Price with VAT: £102.81
    KENNAMETAL SNMG434

    KENNAMETAL

    SNMG434

    CHIP CONTROL INSERT, SNMG120416B, PRICE/EACH
    ✓ IN STOCK!
    £22.88 Price with VAT: £27.46 Buy Surplus As Low As £11.36 Price with VAT: £13.64
    £11.36 Price with VAT: £13.64
    KENNAMETAL MCLNL165C

    KENNAMETAL

    MCLNL165C

    KENNAMETAL, MCLNL165C, TURNING TOOLHOLDER, GAUGE INSERT, HEX 1/8IN,
    ✓ IN STOCK!
    £94.75 Price with VAT: £113.70 Buy Surplus As Low As £91.85 Price with VAT: £110.22
    £91.85 Price with VAT: £110.22
    KENNAMETAL KC5025

    KENNAMETAL

    KC5025

    INSERT S GRADE KC5025 MACHINE TOOL THREADER
    £22.74 Price with VAT: £27.29 Buy Surplus As Low As £13.69 Price with VAT: £16.43
    £13.69 Price with VAT: £16.43
    KENNAMETAL WB-62498

    KENNAMETAL

    WB-62498

    TOOL HOLDER
    Buy Surplus As Low As £45.48 Price with VAT: £54.58
    £45.48 Price with VAT: £54.58
    KENNAMETAL KSFR-164C

    KENNAMETAL

    KSFR-164C

    TOOL HOLDER 1IN SHANK
    £48.51 Price with VAT: £58.21 Buy Surplus As Low As £29.56 Price with VAT: £35.47
    £29.56 Price with VAT: £35.47
    KENNAMETAL DCLNR-1640

    KENNAMETAL

    DCLNR-1640

    TOOL HOLDER
    £48.51 Price with VAT: £58.21 Buy Surplus As Low As £29.56 Price with VAT: £35.47
    £29.56 Price with VAT: £35.47
    KENNAMETAL NSR-162C

    KENNAMETAL

    NSR-162C

    TOOL HOLDER TOP NOTCH TURN 1IN SHANK
    £80.35 Price with VAT: £96.42 Buy Surplus As Low As £48.51 Price with VAT: £58.21
    £48.51 Price with VAT: £58.21
    KENNAMETAL DVJNR-163D

    KENNAMETAL

    DVJNR-163D

    TOOL HOLDER 1X1X6IN
    £97.02 Price with VAT: £116.43 Buy Surplus As Low As £58.37 Price with VAT: £70.04
    £58.37 Price with VAT: £70.04
    KENNAMETAL MCLNR-164C

    KENNAMETAL

    MCLNR-164C

    TURNING TOOLHOLDER SIZE 164C
    £80.35 Price with VAT: £96.42 Buy Surplus As Low As £48.51 Price with VAT: £58.21
    £48.51 Price with VAT: £58.21
    KENNAMETAL DTGNL-205D

    KENNAMETAL

    DTGNL-205D

    TURNING TOOL HOLDER 1.25IN SHANK
    £120.52 Price with VAT: £144.63 Buy Surplus As Low As £72.77 Price with VAT: £87.32
    £72.77 Price with VAT: £87.32
    KENNAMETAL 1749284

    KENNAMETAL

    1749284

    CAT50 TAPER, 1.9685" INSIDE HOLE DIAM, 3.4252" PROJECTION, WHISTLE NOTCH ADAPTER, (MOQ=1, PKG QTY=1)1749284
    £516.96 Price with VAT: £620.35 Buy Surplus As Low As £310.78 Price with VAT: £372.94
    £310.78 Price with VAT: £372.94
    KENNAMETAL 1191633

    KENNAMETAL

    1191633

    SPOTTING DRILL: 20 MM DIA, 90 ° POINT, 92 MM OAL, SOLID CARBIDE, (MOQ=1, PKG QTY=1)1191633
    £563.20 Price with VAT: £675.84 Buy Surplus As Low As £338.07 Price with VAT: £405.69
    £338.07 Price with VAT: £405.69
    KENNAMETAL CPGM-32.52/KC850

    KENNAMETAL

    CPGM-32.52/KC850

    INSERT FOR CUTTING TOOL
    Buy Surplus As Low As £7.28 Price with VAT: £8.73
    £7.28 Price with VAT: £8.73
    KENNAMETAL 1110558

    KENNAMETAL

    1110558

    ER: ER16, 4.5 MM, (MOQ=1, PKG QTY=1)1110558
    £53.82 Price with VAT: £64.58 Buy Surplus As Low As £32.59 Price with VAT: £39.11
    £32.59 Price with VAT: £39.11
    KENNAMETAL 1108068

    KENNAMETAL

    1108068

    SHIM FOR INDEXABLES: TURNING, (MOQ=10, PKG QTY=1)1108068
    £25.77 Price with VAT: £30.93 Buy Surplus As Low As £15.92 Price with VAT: £19.10
    £15.92 Price with VAT: £19.10
    KENNAMETAL 1108063

    KENNAMETAL

    1108063

    LOCK PIN FOR INDEXABLE TURNING TOOLS, (MOQ=1, PKG QTY=1)1108063
    £6.30 Price with VAT: £7.56 Buy Surplus As Low As £3.78 Price with VAT: £4.54
    £3.78 Price with VAT: £4.54
    KENNAMETAL 1025177

    KENNAMETAL

    1025177

    SCREW FOR INDEXABLES: 3/8" HEX SOCKET, (MOQ=1, PKG QTY=5)1025177
    £91.72 Price with VAT: £110.06 Buy Surplus As Low As £55.33 Price with VAT: £66.40
    £55.33 Price with VAT: £66.40
    KENNAMETAL 1024980

    KENNAMETAL

    1024980

    SCREW FOR INDEXABLES: 1/8" HEX SOCKET, (MOQ=1, PKG QTY=5)1024980
    £63.67 Price with VAT: £76.41 Buy Surplus As Low As £38.66 Price with VAT: £46.39
    £38.66 Price with VAT: £46.39
    KENNAMETAL 1021539

    KENNAMETAL

    1021539

    3MM HEX SOCKET, M8X1 THREAD, LOCK PIN FOR INDEXABLE TURNING TOOLS, (MOQ=5, PKG QTY=1)1021539
    £28.05 Price with VAT: £33.66 Buy Surplus As Low As £17.43 Price with VAT: £20.92
    £17.43 Price with VAT: £20.92
    KENNAMETAL 1018311

    KENNAMETAL

    1018311

    CAT50 OUTSIDE TAPER, SS TO CAT STRAIGHT SHANK ADAPTER, (MOQ=1, PKG QTY=1)1018311
    £245.59 Price with VAT: £294.71 Buy Surplus As Low As £147.81 Price with VAT: £177.37
    £147.81 Price with VAT: £177.37
    KENNAMETAL 1017220

    KENNAMETAL

    1017220

    SHIM FOR INDEXABLES: 5.82 MM INSCRIBED CIRCLE, TURNING, (MOQ=1, PKG QTY=1)1017220
    £25.77 Price with VAT: £30.93 Buy Surplus As Low As £15.92 Price with VAT: £19.10
    £15.92 Price with VAT: £19.10
    KENNAMETAL 1016724

    KENNAMETAL

    1016724

    SHIM FOR INDEXABLES: 3/4" INSCRIBED CIRCLE, TURNING, (MOQ=1, PKG QTY=1)1016724
    £36.38 Price with VAT: £43.66 Buy Surplus As Low As £21.98 Price with VAT: £26.38
    £21.98 Price with VAT: £26.38
    KENNAMETAL A4SMR-160317

    KENNAMETAL

    A4SMR-160317

    KENNAMETAL, A4SMR-160317, A4SMR160317, TOOL HOLDER, RIGHT HAND, SEAT SIZE 3, TORX T30
    £144.02 Price with VAT: £172.83 Buy Surplus As Low As £72.01 Price with VAT: £86.41
    £72.01 Price with VAT: £86.41
    KENNAMETAL KISR150SE4453

    KENNAMETAL

    KISR150SE4453

    KENNAMETAL, KISR150SE4453, STRAIGHT SHANK, 45DEGREE LEAD ANGLE, 1-3/4IN MAX CUT DIAM, 1-1/2IN MIN CUT DIAM, 0.221IN MAX DEPTH OF CUT, INDEXABLE CHAMFER AND ANGLE END MILL, 3 INSERTS, SEHW 43 ...
    £466.17 Price with VAT: £559.41 Buy Surplus As Low As £279.70 Price with VAT: £335.65
    £279.70 Price with VAT: £335.65
    KENNAMETAL NSL-163C

    KENNAMETAL

    NSL-163C

    DISCONTINUED BY MANUFACTURER, KENNAMETAL, NSL-163C, NSL163C, GROOVING TOOL HOLDER, CLAMP SCREW S2112, HEX/TORX PLUS 25IP
    Buy Surplus As Low As £54.58 Price with VAT: £65.49
    £54.58 Price with VAT: £65.49
    KENNAMETAL CCLPR12CA4

    KENNAMETAL

    CCLPR12CA4

    INDEXABLE TURNING CARTRIDGE
    Buy Surplus As Low As £61.40 Price with VAT: £73.68
    £61.40 Price with VAT: £73.68
    KENNAMETAL CNMG433MG-KC9010

    KENNAMETAL

    CNMG433MG-KC9010

    CARBON STEEL INSERT
    £35.63 Price with VAT: £42.75 Buy Surplus As Low As £21.98 Price with VAT: £26.38
    £21.98 Price with VAT: £26.38
    KENNAMETAL CNMG432PLRC8025

    KENNAMETAL

    CNMG432PLRC8025

    CARBON STEEL INSERT
    £35.63 Price with VAT: £42.75 Buy Surplus As Low As £21.98 Price with VAT: £26.38
    £21.98 Price with VAT: £26.38
    KENNAMETAL 2077947

    KENNAMETAL

    2077947

    55MM OAL X 14MM OAW X 19.25MM OAH LEFT HAND INDEXABLE TURNING CARTRIDGE, (MOQ=1, PKG QTY=1)2077947
    £158.42 Price with VAT: £190.11 Buy Surplus As Low As £95.51 Price with VAT: £114.61
    £95.51 Price with VAT: £114.61
    KENNAMETAL 2057426

    KENNAMETAL

    2057426

    55MM OAL X 14MM OAW X 19.25MM OAH LEFT HAND INDEXABLE TURNING CARTRIDGE, (MOQ=1, PKG QTY=1)2057426
    £158.42 Price with VAT: £190.11 Buy Surplus As Low As £95.51 Price with VAT: £114.61
    £95.51 Price with VAT: £114.61
    KENNAMETAL MTWL-103

    KENNAMETAL

    MTWL-103

    TURNING TOOL HOLDER
    Buy Surplus As Low As £34.11 Price with VAT: £40.93
    £34.11 Price with VAT: £40.93
    KENNAMETAL DTFNL-164D

    KENNAMETAL

    DTFNL-164D

    TURNING TOOL HOLDER
    £44.72 Price with VAT: £53.67 Buy Surplus As Low As £26.53 Price with VAT: £31.84
    £26.53 Price with VAT: £31.84
    KENNAMETAL DSDNN-164

    KENNAMETAL

    DSDNN-164

    TURNING TOOL HOLDER
    £194.81 Price with VAT: £233.77 Buy Surplus As Low As £97.78 Price with VAT: £117.34
    £97.78 Price with VAT: £117.34
    KENNAMETAL 1803431

    KENNAMETAL

    1803431

    INDEXABLE CUTOFF TOOLHOLDER: 26 MM MAX DEPTH OF CUT, 2.44" MAX WORKPIECE DIA, LEFT HAND1803431
    £206.94 Price with VAT: £248.32 Buy Surplus As Low As £124.31 Price with VAT: £149.18
    £124.31 Price with VAT: £149.18
    KENNAMETAL 400.9375

    KENNAMETAL

    HERTEL

    400.9375

    TAPER LENGTH DRILL: 0.9375" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.9375
    £107.64 Price with VAT: £129.16 Buy Surplus As Low As £65.19 Price with VAT: £78.23
    £65.19 Price with VAT: £78.23
    KENNAMETAL 400.6875

    KENNAMETAL

    HERTEL

    400.6875

    TAPER LENGTH DRILL: 0.6875" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.6875
    £63.67 Price with VAT: £76.41 Buy Surplus As Low As £38.66 Price with VAT: £46.39
    £38.66 Price with VAT: £46.39
    KENNAMETAL 400.65625

    KENNAMETAL

    HERTEL

    400.65625

    TAPER LENGTH DRILL: 0.6562" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.65625
    £54.58 Price with VAT: £65.49 Buy Surplus As Low As £33.35 Price with VAT: £40.02
    £33.35 Price with VAT: £40.02
    KENNAMETAL 400.625

    KENNAMETAL

    HERTEL

    400.625

    TAPER LENGTH DRILL: 0.6250" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.625
    £50.79 Price with VAT: £60.94 Buy Surplus As Low As £31.08 Price with VAT: £37.29
    £31.08 Price with VAT: £37.29
    KENNAMETAL 400.59375

    KENNAMETAL

    HERTEL

    400.59375

    TAPER LENGTH DRILL: 0.5938" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.59375
    £49.27 Price with VAT: £59.12 Buy Surplus As Low As £29.56 Price with VAT: £35.47
    £29.56 Price with VAT: £35.47
    KENNAMETAL 400.46875

    KENNAMETAL

    HERTEL

    400.46875

    TAPER LENGTH DRILL: 0.4688" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.46875
    £27.29 Price with VAT: £32.75 Buy Surplus As Low As £16.68 Price with VAT: £20.01
    £16.68 Price with VAT: £20.01
    KENNAMETAL 400.453125

    KENNAMETAL

    HERTEL

    400.453125

    TAPER LENGTH DRILL: 0.4531" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.453125
    £26.53 Price with VAT: £31.84 Buy Surplus As Low As £15.92 Price with VAT: £19.10
    £15.92 Price with VAT: £19.10
    KENNAMETAL 400.4375

    KENNAMETAL

    HERTEL

    400.4375

    TAPER LENGTH DRILL: 0.4375" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.4375
    £24.26 Price with VAT: £29.11 Buy Surplus As Low As £15.16 Price with VAT: £18.19
    £15.16 Price with VAT: £18.19
    KENNAMETAL 400.421875

    KENNAMETAL

    HERTEL

    400.421875

    TAPER LENGTH DRILL: 0.4219" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.421875
    £24.26 Price with VAT: £29.11 Buy Surplus As Low As £15.16 Price with VAT: £18.19
    £15.16 Price with VAT: £18.19
    KENNAMETAL 400.328125

    KENNAMETAL

    HERTEL

    400.328125

    TAPER LENGTH DRILL: 0.3281" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.328125
    £16.68 Price with VAT: £20.01 Buy Surplus As Low As £10.61 Price with VAT: £12.73
    £10.61 Price with VAT: £12.73
    KENNAMETAL 400.3125

    KENNAMETAL

    HERTEL

    400.3125

    TAPER LENGTH DRILL: 0.3125" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.3125
    £15.16 Price with VAT: £18.19 Buy Surplus As Low As £9.10 Price with VAT: £10.92
    £9.10 Price with VAT: £10.92
    KENNAMETAL 400.296875

    KENNAMETAL

    HERTEL

    400.296875

    TAPER LENGTH DRILL: 0.2969" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.296875
    £15.16 Price with VAT: £18.19 Buy Surplus As Low As £9.10 Price with VAT: £10.92
    £9.10 Price with VAT: £10.92
    KENNAMETAL 400.28125

    KENNAMETAL

    HERTEL

    400.28125

    TAPER LENGTH DRILL: 0.2812" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.28125
    £13.64 Price with VAT: £16.37 Buy Surplus As Low As £8.34 Price with VAT: £10.01
    £8.34 Price with VAT: £10.01
    KENNAMETAL 400.203125

    KENNAMETAL

    HERTEL

    400.203125

    TAPER LENGTH DRILL: 0.2031" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.203125
    £10.61 Price with VAT: £12.73 Buy Surplus As Low As £6.37 Price with VAT: £7.64
    £6.37 Price with VAT: £7.64
    KENNAMETAL 400.1875

    KENNAMETAL

    HERTEL

    400.1875

    TAPER LENGTH DRILL: 0.1875" DIA, 118 DEG, HSS, (MOQ=1, PKG QTY=1)400.1875
    £9.85 Price with VAT: £11.82 Buy Surplus As Low As £5.91 Price with VAT: £7.10
    £5.91 Price with VAT: £7.10
    Next
    1 2 3