SEARCH NOW FOR ALL YOUR KENNAMETAL SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Filter Results
KENNAMETAL
1289027
9 PIECE, 1/8 TO 1/4" CAPACITY, DA300 DOUBLE ANGLE COLLET SET INCREMENTS OF 1/64"
£110.06
Price with VAT:
£132.07
KENNAMETAL
HERTEL
H59868372
BORING BAR, 0.208" MIN BORE, 1-7/8" MAX DEPTH, RIGHT HAND HBBC INDEXABLE 6" OAL, 3/16" SHANK DIAM, USES CD.., HBBC INSERTS, THROUGH COOLANT
£189.20
Price with VAT:
£227.05
KENNAMETAL
HERTEL
H08700627
SCREWS FOR INDEXABLE THREADING FOR USE WITH ANVILSH08700627
£1.57
Price with VAT:
£1.88
KENNAMETAL
HERTEL
H00481515
SCREWS FOR INDEXABLE THREADING FOR USE WITH INSERTSH00481515
£1.65
Price with VAT:
£1.98
KENNAMETAL
HERTEL
CH-36330
STANDARD STRAIGHT-LINE ACTION CLAMPS; LOAD CAPACITY (N): 11120.5 ; LOAD CAPACITY (LB.): 2500.00 ; LOAD CAPACITY (KG): 1133.96 ; LOAD CAPACITY: 11121 ; PLUNGER TRAVEL (MM): 50 ; PLUNGER TRAVE ...
£22.84
Price with VAT:
£27.41
KENNAMETAL
HERTEL
8000178
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IVSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£24.12
Price with VAT:
£28.95
KENNAMETAL
HERTEL
8000176
5/8" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000176
£18.85
Price with VAT:
£22.61
KENNAMETAL
HERTEL
8000175
1/2" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ITSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.83
Price with VAT:
£19.00
KENNAMETAL
HERTEL
8000174
1/4" INSCRIBED CIRCLE, TRIANGLE EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, POSITIVE RAKE, NEUTRAL CUT8000174
£10.55
Price with VAT:
£12.66
KENNAMETAL
HERTEL
8000185
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SKVN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£16.58
Price with VAT:
£19.90
KENNAMETAL
HERTEL
8000182
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SKDP SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£16.58
Price with VAT:
£19.90
KENNAMETAL
HERTEL
8000171
3/4" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£18.09
Price with VAT:
£21.71
KENNAMETAL
HERTEL
8000166
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, IRSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.83
Price with VAT:
£19.00
KENNAMETAL
HERTEL
8000164
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/4" THICK, IDSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.08
Price with VAT:
£18.09
KENNAMETAL
HERTEL
8000162
1/2" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ICSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£15.08
Price with VAT:
£18.09
KENNAMETAL
HERTEL
8000189
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000189
£11.31
Price with VAT:
£13.57
KENNAMETAL
HERTEL
8000188
3/8" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£10.55
Price with VAT:
£12.66
KENNAMETAL
HERTEL
8000187
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000187
£13.57
Price with VAT:
£16.28
KENNAMETAL
HERTEL
8000186
1/2" INSCRIBED CIRCLE, ROUND EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, SM SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£12.06
Price with VAT:
£14.47
KENNAMETAL
HERTEL
8000163
3/8" INSCRIBED CIRCLE, DIAMOND (SHAPE) EXTERNAL TURNING SHIM FOR INDEXABLES 1/8" THICK, IDSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT
£13.57
Price with VAT:
£16.28
KENNAMETAL
HERTEL
8000170
1/2" INSCRIBED CIRCLE, SQUARE EXTERNAL TURNING SHIM FOR INDEXABLES 3/16" THICK, ISSN SHIM STYLE, NEGATIVE RAKE, NEUTRAL CUT8000170
£12.06
Price with VAT:
£14.47
KENNAMETAL
HERTEL
750624
3/8", 5/8" LOC, 3/8" SHANK DIAM, 2" OAL, 2 FLUTE, SOLID CARBIDE SQUARE END MILL SINGLE END, TIN FINISH, SPIRAL FLUTE, 30° HELIX, CENTERCUTTING, RIGHT HAND CUT
£21.11
Price with VAT:
£25.33
KENNAMETAL
HERTEL
7000390
2" BODY DIAM, MANUAL SINGLE CUTTER BORING HEAD COLLET CHUCK MOUNT, ER32 TAPER SHANK, 16MM HOLE DIAM, ER32, 0.12" TO 3.4600" BORE DIAM, SERIES HBH150
£673.90
Price with VAT:
£808.68
KENNAMETAL
HERTEL
2292258
LETTER Y 6-FLUTE STRAIGHT SHANK STRAIGHT FLUTE HIGH SPEED STEEL CHUCKING REAMER BRIGHT FINISH, 7" OAL, 1-3/4" FLUTE LENGTH, RH CUT
£50.25
Price with VAT:
£60.30
KENNAMETAL
HERTEL
1-221-0806
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£725.16
Price with VAT:
£870.19
KENNAMETAL
HERTEL
1-202-0300
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 3 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.6299 ; BODY MATERIAL: CAST IRON (SEM ...
£309.81
Price with VAT:
£371.78
KENNAMETAL
HERTEL
1-201-1000
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SE ...
£457.56
Price with VAT:
£549.07
KENNAMETAL
HERTEL
1-322-1004
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2360 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£886.47
Price with VAT:
£1,063.77
KENNAMETAL
HERTEL
1-322-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.2050 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£618.87
Price with VAT:
£742.65
KENNAMETAL
HERTEL
1-203-1200
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 4.0551 ; BODY MATERIAL: CAST IRON (SE ...
£1,282.22
Price with VAT:
£1,538.66
KENNAMETAL
HERTEL
1-202-0801
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): .2.1654 ; BODY MATERIAL: C ...
£359.56
Price with VAT:
£431.48
KENNAMETAL
HERTEL
1-202-0400
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 4 ; NUMBER OF JAWS: 3 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 0.7874 ; BODY MATERIAL: CAST IRON (SEM ...
£329.41
Price with VAT:
£395.29
KENNAMETAL
6694046
2MM X 20MM HSK100A TAPER SHANK ER32 COLLET CHUCK 209.9MM OAL, 160MM PROJECTION
£434.19
Price with VAT:
£521.03
KENNAMETAL
HERTEL
1-302-0600
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.7720 ; BODY MATERIAL: CAST IRON (SEMI-S ...
£422.13
Price with VAT:
£506.56
KENNAMETAL
HERTEL
1-221-1008
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: D1-8 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: CAST IRON (SEMI-STE ...
£832.20
Price with VAT:
£998.64
KENNAMETAL
HERTEL
1-203-0800
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 4 ; MOUNT: PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEM ...
£508.06
Price with VAT:
£609.68
KENNAMETAL
HERTEL
1-201-0601
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.6535 ; BODY MATERIAL: CA ...
£418.36
Price with VAT:
£502.03
KENNAMETAL
HERTEL
1-322-1206
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 12 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 3.1500 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£1,243.77
Price with VAT:
£1,492.53
KENNAMETAL
HERTEL
1-322-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: D1-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5990 ; BODY MATERIAL: CAST IRON (SEMI-STEEL)
£753.80
Price with VAT:
£904.56
KENNAMETAL
HERTEL
1-312-1006
MANUAL LATHE CHUCKS; CHUCK TYPE: INDEPENDENT ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 4 ; MOUNT: A2-6 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.5590 ; BODY MATERIAL: CAST IRON (SEMI-STEEL) ...
£933.21
Price with VAT:
£1,119.85
KENNAMETAL
HERTEL
1-221-0804
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 8 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.1654 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£900.79
Price with VAT:
£1,080.95
KENNAMETAL
HERTEL
1-221-0604
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 6 ; NUMBER OF JAWS: 3 ; MOUNT: D1-4 ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 1.1635 ; BODY MATERIAL: CAST IRON (SEMI-STEE ...
£567.61
Price with VAT:
£681.14
KENNAMETAL
HERTEL
1-201-1001
MANUAL LATHE CHUCKS; CHUCK TYPE: SELF-CENTERING ; NOMINAL CHUCK SIZE: 10 ; NUMBER OF JAWS: 3 ; MOUNT: FRONT MOUNT PLAIN BACK ; THROUGH-HOLE DIAMETER (DECIMAL INCH): 2.9921 ; BODY MATERIAL: C ...
£459.07
Price with VAT:
£550.88
KENNAMETAL
5673343
TORX PLUS INSERT SCREW FOR INDEXABLES SHANK COMPATIBLE
£4.46
Price with VAT:
£5.35
KENNAMETAL
3795029
1MM X 16MM KM50TS MODULAR CONNECTION ER25 COLLET CHUCK 50MM PROJECTION, THROUGH-SPINDLE COOLANT
£304.54
Price with VAT:
£365.44
KENNAMETAL
1260380
SERIES SEPARATOR, CM CLAMP FOR INDEXABLES LEFT HAND CUT
£33.92
Price with VAT:
£40.71
