Product Search

    SEARCH NOW FOR ALL YOUR OSG SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Cutting HSS & Solid Carbide / End Mill

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 120.
    OSG 3056227

    OSG

    3056227

    BALL END MILL: 0.0394" DIA, 2 FLUTE, SOLID CARBIDE
    £101.57 Price with VAT: £121.89 Buy Surplus As Low As £61.40 Price with VAT: £73.68
    £61.40 Price with VAT: £73.68
    OSG 3056168

    OSG

    3056168

    BALL END MILL: 0.0236" DIA, 2 FLUTE, SOLID CARBIDE
    £59.12 Price with VAT: £70.95 Buy Surplus As Low As £35.63 Price with VAT: £42.75
    £35.63 Price with VAT: £42.75
    OSG 3056164

    OSG

    3056164

    BALL END MILL: 0.0236" DIA, 2 FLUTE, SOLID CARBIDE
    £59.12 Price with VAT: £70.95 Buy Surplus As Low As £35.63 Price with VAT: £42.75
    £35.63 Price with VAT: £42.75
    OSG 3056157

    OSG

    3056157

    BALL END MILL: 0.0197" DIA, 2 FLUTE, SOLID CARBIDE
    £78.07 Price with VAT: £93.69 Buy Surplus As Low As £47.00 Price with VAT: £56.40
    £47.00 Price with VAT: £56.40
    OSG 3056145

    OSG

    3056145

    BALL END MILL: 0.0158" DIA, 2 FLUTE, SOLID CARBIDE
    £112.94 Price with VAT: £135.53 Buy Surplus As Low As £68.22 Price with VAT: £81.86
    £68.22 Price with VAT: £81.86
    OSG 3056104

    OSG

    3056104

    BALL END MILL: 0.0079" DIA, 2 FLUTE, SOLID CARBIDE
    £95.51 Price with VAT: £114.61 Buy Surplus As Low As £57.61 Price with VAT: £69.13
    £57.61 Price with VAT: £69.13
    OSG 3042014

    OSG

    3042014

    BALL END MILL: 10.00 MM DIA, 15.00 MM LOC, 2 FLUTE(S), SOLID CARBIDE
    £142.51 Price with VAT: £171.01 Buy Surplus As Low As £85.65 Price with VAT: £102.79
    £85.65 Price with VAT: £102.79
    OSG 3042012

    OSG

    3042012

    BALL END MILL: 0.315" DIA, 2 FLUTE, SOLID CARBIDE
    £121.28 Price with VAT: £145.54 Buy Surplus As Low As £72.77 Price with VAT: £87.32
    £72.77 Price with VAT: £87.32
    OSG 460-3750

    OSG

    460-3750

    SQUARE END MILL: 3/8'' DIA, 1'' LOC, 3/8'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, SOLID CARBIDE
    £50.79 Price with VAT: £60.94 Buy Surplus As Low As £31.08 Price with VAT: £37.29
    £31.08 Price with VAT: £37.29
    OSG 44130613

    OSG

    44130613

    BALL END MILL: 1/4" DIA, 0.1768" LOC, 6 FLUTE, SOLID CARBIDE
    £152.36 Price with VAT: £182.83 Buy Surplus As Low As £91.72 Price with VAT: £110.06
    £91.72 Price with VAT: £110.06
    OSG 482-1575-BN

    OSG

    482-1575-BN

    BALL END MILL: 0.1575" DIA, 1.1024" LOC, 2 FLUTE, SOLID CARBIDE
    £34.11 Price with VAT: £40.93 Buy Surplus As Low As £20.47 Price with VAT: £24.56
    £20.47 Price with VAT: £24.56
    OSG 4550008

    OSG

    4550008

    SQUARE END MILL: 1/2'' DIA, 1/2'' LOC, 1/2'' SHANK DIA, 2-1/2'' OAL, 3 FLUTES, COBALT
    £116.73 Price with VAT: £140.08 Buy Surplus As Low As £70.49 Price with VAT: £84.59
    £70.49 Price with VAT: £84.59
    OSG 452-1250-BN

    OSG

    452-1250-BN

    BALL END MILL: 0.125" DIA, 0.5" LOC, 2 FLUTE, SOLID CARBIDE
    £22.74 Price with VAT: £27.29 Buy Surplus As Low As £13.64 Price with VAT: £16.37
    £13.64 Price with VAT: £16.37
    OSG 45130004

    OSG

    45130004

    BALL END MILL: 0.1575" DIA, 0.1181" LOC, 2 FLUTE, SOLID CARBIDE
    £131.89 Price with VAT: £158.27 Buy Surplus As Low As £79.59 Price with VAT: £95.51
    £79.59 Price with VAT: £95.51
    OSG 447200513

    OSG

    447200513

    CORNER RADIUS END MILL: 1/2" DIA, 0.2" LOC, 5 FLUTES, SOLID CARBIDE
    £290.32 Price with VAT: £348.38 Buy Surplus As Low As £174.34 Price with VAT: £209.21
    £174.34 Price with VAT: £209.21
    OSG 422-1406-BN

    OSG

    422-1406-BN

    BALL END MILL: 0.1406" DIA, 0.2813" LOC, 2 FLUTE, SOLID CARBIDE
    £26.53 Price with VAT: £31.84 Buy Surplus As Low As £15.92 Price with VAT: £19.10
    £15.92 Price with VAT: £19.10
    OSG 414-0469-BN11

    OSG

    414-0469-BN11

    BALL END MILL: 0.0469" DIA, 4 FLUTE, SOLID CARBIDE
    £22.74 Price with VAT: £27.29 Buy Surplus As Low As £13.64 Price with VAT: £16.37
    £13.64 Price with VAT: £16.37
    OSG 412-3750-BN11

    OSG

    412-3750-BN11

    BALL END MILL: 0.375" DIA, 2 FLUTE, SOLID CARBIDE
    £57.61 Price with VAT: £69.13 Buy Surplus As Low As £34.87 Price with VAT: £41.84
    £34.87 Price with VAT: £41.84
    OSG 404-118111

    OSG

    404-118111

    SQUARE END MILL: 4 FLUTES, SOLID CARBIDE
    £19.71 Price with VAT: £23.65 Buy Surplus As Low As £12.13 Price with VAT: £14.55
    £12.13 Price with VAT: £14.55
    OSG 404-0984-BN11

    OSG

    404-0984-BN11

    BALL END MILL: 0.0984" DIA, 0.315" LOC, 4 FLUTE, SOLID CARBIDE
    £20.47 Price with VAT: £24.56 Buy Surplus As Low As £12.89 Price with VAT: £15.46
    £12.89 Price with VAT: £15.46
    OSG 404-0787-BN11

    OSG

    404-0787-BN11

    BALL END MILL: 0.0787" DIA, 0.2756" LOC, 4 FLUTE, SOLID CARBIDE
    £21.98 Price with VAT: £26.38 Buy Surplus As Low As £13.64 Price with VAT: £16.37
    £13.64 Price with VAT: £16.37
    OSG 404-0591-BN11

    OSG

    404-0591-BN11

    BALL END MILL: 0.0591" DIA, 0.1969" LOC, 4 FLUTE, SOLID CARBIDE
    £20.47 Price with VAT: £24.56 Buy Surplus As Low As £12.89 Price with VAT: £15.46
    £12.89 Price with VAT: £15.46
    OSG 38255311

    OSG

    38255311

    ROUGHING END MILLS; MILL DIAMETER (FRACTIONAL INCH): 1 ; NUMBER OF FLUTES: 4 ; END MILL MATERIAL: SOLID CARBIDE ; PITCH: FINE ; LENGTH OF CUT: 2-3/4 (INCH); COATING/FINISH: WXL
    £754.22 Price with VAT: £905.06 Buy Surplus As Low As £452.53 Price with VAT: £543.04
    £452.53 Price with VAT: £543.04
    OSG 3182039

    OSG

    3182039

    SQUARE END MILL: 0.1535'' DIA, 0.3071'' LOC, 2 FLUTES, SOLID CARBIDE
    £81.11 Price with VAT: £97.33 Buy Surplus As Low As £49.27 Price with VAT: £59.12
    £49.27 Price with VAT: £59.12
    OSG 3182010

    OSG

    3182010

    SQUARE END MILL: 0.0394'' DIA, 0.0787'' LOC, 2 FLUTES, SOLID CARBIDE
    £36.38 Price with VAT: £43.66 Buy Surplus As Low As £21.98 Price with VAT: £26.38
    £21.98 Price with VAT: £26.38
    OSG 3174020

    OSG

    3174020

    SQUARE END MILL: 0.1181'' DIA, 0.1772'' LOC, 4 FLUTES, SOLID CARBIDE
    £114.46 Price with VAT: £137.35 Buy Surplus As Low As £68.98 Price with VAT: £82.77
    £68.98 Price with VAT: £82.77
    OSG 3111090

    OSG

    3111090

    BALL END MILL: 1.00 MM DIA, 19/64" LOC, 2 FLUTE(S), SOLID CARBIDE
    £83.38 Price with VAT: £100.06 Buy Surplus As Low As £50.03 Price with VAT: £60.03
    £50.03 Price with VAT: £60.03
    OSG 3110550

    OSG

    3110550

    BALL END MILL: 0.0197" DIA, 0.0157" LOC, 2 FLUTE, SOLID CARBIDE
    £103.09 Price with VAT: £123.71 Buy Surplus As Low As £62.16 Price with VAT: £74.59
    £62.16 Price with VAT: £74.59
    OSG 70311616

    OSG

    70311616

    BALL END MILL: 0.5" DIA, 2" LOC, 4 FLUTE, SOLID CARBIDE
    £513.17 Price with VAT: £615.80 Buy Surplus As Low As £308.51 Price with VAT: £370.21
    £308.51 Price with VAT: £370.21
    OSG 6461100

    OSG

    6461100

    SQUARE END MILL: 1/2'' DIA, 2'' LOC, 1/2'' SHANK DIA, 4'' OAL, 4 FLUTES, POWDERED METAL
    £119.77 Price with VAT: £143.72 Buy Surplus As Low As £72.01 Price with VAT: £86.41
    £72.01 Price with VAT: £86.41
    OSG 3056223

    OSG

    3056223

    BALL END MILL: 0.0394" DIA, 2 FLUTE, SOLID CARBIDE
    £77.32 Price with VAT: £92.78 Buy Surplus As Low As £47.00 Price with VAT: £56.40
    £47.00 Price with VAT: £56.40
    OSG VGM7-2094

    OSG

    VGM7-2094

    CORNER RADIUS END MILL: 3/4" DIA, 1-1/2" LOC, 0.0300" RADIUS, 7 FLUTE, SOLID CARBIDE
    £336.56 Price with VAT: £403.87 Buy Surplus As Low As £202.39 Price with VAT: £242.87
    £202.39 Price with VAT: £242.87
    OSG VGM7-2061

    OSG

    VGM7-2061

    CORNER RADIUS END MILL: 1/2" DIA, 1" LOC, 0.0300" RADIUS, 7 FLUTE, SOLID CARBIDE
    £128.10 Price with VAT: £153.72 Buy Surplus As Low As £77.32 Price with VAT: £92.78
    £77.32 Price with VAT: £92.78
    OSG VGM7-0105

    OSG

    VGM7-0105

    SQUARE END MILL: 1'' DIA, 2'' LOC, 1'' SHANK DIA, 5'' OAL, 7 FLUTES, SOLID CARBIDE
    £419.18 Price with VAT: £503.01 Buy Surplus As Low As £251.66 Price with VAT: £301.99
    £251.66 Price with VAT: £301.99
    OSG VGM6-0043

    OSG

    VGM6-0043

    CORNER RADIUS END MILL: 3/8" DIA, 9/16" LOC, 0.0300" RADIUS, 6 FLUTE, SOLID CARBIDE
    £93.23 Price with VAT: £111.88 Buy Surplus As Low As £56.09 Price with VAT: £67.31
    £56.09 Price with VAT: £67.31
    OSG VGM6-0034

    OSG

    VGM6-0034

    CORNER RADIUS END MILL: 5/16" DIA, 15/16" LOC, 0.0200" RADIUS, 6 FLUTE, SOLID CARBIDE
    £77.32 Price with VAT: £92.78 Buy Surplus As Low As £47.00 Price with VAT: £56.40
    £47.00 Price with VAT: £56.40
    OSG VGM5-2189

    OSG

    VGM5-2189

    HIGH PERFORMANCE VARIABLE GEOMETRY NICKED END MILLS
    £206.18 Price with VAT: £247.41 Buy Surplus As Low As £124.31 Price with VAT: £149.18
    £124.31 Price with VAT: £149.18
    OSG VGM5-2150

    OSG

    VGM5-2150

    CORNER RADIUS END MILL: 1/2" DIA, 1-1/2" LOC, 0.0300" RADIUS, 5 FLUTE, SOLID CARBIDE
    £134.93 Price with VAT: £161.91 Buy Surplus As Low As £81.11 Price with VAT: £97.33
    £81.11 Price with VAT: £97.33
    OSG VGM5-2031

    OSG

    VGM5-2031

    HIGH PERFORMANCE VARIABLE GEOMETRY NICKED END MILLS
    £39.42 Price with VAT: £47.30 Buy Surplus As Low As £24.26 Price with VAT: £29.11
    £24.26 Price with VAT: £29.11
    OSG VGM5-1023

    OSG

    VGM5-1023

    CORNER RADIUS END MILL: 3/16" DIA, 15/64" LOC, 0.0300" RADIUS, 5 FLUTE, SOLID CARBIDE
    £43.96 Price with VAT: £52.76 Buy Surplus As Low As £26.53 Price with VAT: £31.84
    £26.53 Price with VAT: £31.84
    OSG VGM5-0235

    OSG

    VGM5-0235

    CORNER RADIUS END MILL: 3/4" DIA, 3" LOC, 0.0300" RADIUS, 5 FLUTE, SOLID CARBIDE
    £337.31 Price with VAT: £404.78 Buy Surplus As Low As £202.39 Price with VAT: £242.87
    £202.39 Price with VAT: £242.87
    OSG VGM3-0026

    OSG

    VGM3-0026

    VGM SQUARE END MILL: 7/16" DIA, 1-1/4" LOC, 3 FLUTE, SOLID CARBIDE
    £93.99 Price with VAT: £112.79 Buy Surplus As Low As £56.85 Price with VAT: £68.22
    £56.85 Price with VAT: £68.22
    OSG VGM3-0007

    OSG

    VGM3-0007

    CORNER RADIUS END MILL: 3/16" DIA, 9/16" LOC, 0.0200" RADIUS, 3 FLUTE, SOLID CARBIDE
    £37.14 Price with VAT: £44.57 Buy Surplus As Low As £22.74 Price with VAT: £27.29
    £22.74 Price with VAT: £27.29
    OSG HP460-1575

    OSG

    HP460-1575

    SQUARE END MILL: 0.1575'' DIA, 0.5512'' LOC, 3 FLUTES, SOLID CARBIDE
    £37.14 Price with VAT: £44.57 Buy Surplus As Low As £22.74 Price with VAT: £27.29
    £22.74 Price with VAT: £27.29
    OSG HP455-3750

    OSG

    HP455-3750

    SQUARE END MILL: 0.3750" DIA, 0.75" LOC, 0.3125" SHANK DIA, 2.5" OAL, 5 FLUTES, SOLID CARBIDE
    £90.96 Price with VAT: £109.15 Buy Surplus As Low As £54.58 Price with VAT: £65.49
    £54.58 Price with VAT: £65.49
    OSG HP413-0787

    OSG

    HP413-0787

    BALL END MILL: 0.0787" DIA, 0.0787" LOC, 2 FLUTE, SOLID CARBIDE
    £49.27 Price with VAT: £59.12 Buy Surplus As Low As £29.56 Price with VAT: £35.47
    £29.56 Price with VAT: £35.47
    OSG HP400-4724

    OSG

    HP400-4724

    SQUARE END MILL: 0.4724'' DIA, 0.9843'' LOC, 4 FLUTES, SOLID CARBIDE
    £144.02 Price with VAT: £172.83 Buy Surplus As Low As £86.41 Price with VAT: £103.70
    £86.41 Price with VAT: £103.70
    OSG 86710819

    OSG

    86710819

    CORNER RADIUS & CORNER CHAMFER END MILLS; MILL DIAMETER (INCH): 3/4 ; MILL DIAMETER (DECIMAL INCH): 0.7500 ; NUMBER OF FLUTES: 3 ; LENGTH OF CUT (INCH): 2-1/4 ; SINGLE OR DOUBLE END: SINGLE ...
    £415.39 Price with VAT: £498.47 Buy Surplus As Low As £249.38 Price with VAT: £299.26
    £249.38 Price with VAT: £299.26
    OSG 86710319

    OSG

    86710319

    CORNER RADIUS & CORNER CHAMFER END MILLS; MILL DIAMETER (INCH): 1/2 ; MILL DIAMETER (DECIMAL INCH): 0.5000 ; NUMBER OF FLUTES: 3 ; LENGTH OF CUT (INCH): 2 ; SINGLE OR DOUBLE END: SINGLE ; EN ...
    £159.94 Price with VAT: £191.93 Buy Surplus As Low As £96.27 Price with VAT: £115.52
    £96.27 Price with VAT: £115.52
    OSG 8557343

    OSG

    8557343

    SQUARE END MILL: 6.00 MM DIA, 18.00 MM LOC, 3 FLUTE, SOLID CARBIDE
    £46.24 Price with VAT: £55.49 Buy Surplus As Low As £28.05 Price with VAT: £33.66
    £28.05 Price with VAT: £33.66
    Next
    1 2 3