Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 496.
    SANDVIK 392.45520-50 25 100

    SANDVIK

    392.45520-50 25 100

    DISCONTINUED BY MANUFACTURER, END MILL. COROMANT, 25 MM
    ✓ IN STOCK!
    Buy Surplus As Low As £79.65 Price with VAT: £95.59
    £79.65 Price with VAT: £95.59
    SANDVIK FK1500

    SANDVIK

    FK1500

    DISCONTINUED BY MANUFACTURER, AIR FILTER,FLOW DIRECTION: FROM OUTSIDE, PAPER,TYPE OF FLUID: OIL
    ✓ IN STOCK!
    Buy Surplus As Low As £242.64 Price with VAT: £291.17
    £242.64 Price with VAT: £291.17
    SANDVIK C4-DDHNR-27055-15

    SANDVIK

    C4-DDHNR-27055-15

    DISCONTINUED BY MANUFACTURER, CUTTING UNIT, 107.5 DEGREE ANGLE, CABLE CLAMP, 27 MM WIDTH, 55 MM LENGTH
    ✓ IN STOCK!
    Buy Surplus As Low As £75.18 Price with VAT: £90.21
    £75.18 Price with VAT: £90.21
    SANDVIK PTFNL2020

    SANDVIK

    PTFNL2020

    DISCONTINUED BY MANUFACTURER, CUTTING INDEXABLE, TURNING TOOL HOLDER, LEVER LOCK STYLE, FOR FACING 91 DEGREE APPROACH ANGLE, NEGATIVE TRIANGLE INSERTS, LEFT HANDED
    Buy Surplus As Low As £40.36 Price with VAT: £48.43
    £40.36 Price with VAT: £48.43
    SANDVIK SL70-R123H05LC-HP

    SANDVIK

    SL70-R123H05LC-HP

    COROCUT® 1-2 HEAD FOR PROFILING
    ✓ IN STOCK!
    £364.13 Price with VAT: £436.96 Buy Surplus As Low As £187.10 Price with VAT: £224.52
    £187.10 Price with VAT: £224.52
    SANDVIK SL70-CRDCR-35-12

    SANDVIK

    SL70-CRDCR-35-12

    T-MAX HEAD FOR TURNING
    ✓ IN STOCK!
    £579.17 Price with VAT: £695.00 Buy Surplus As Low As £244.48 Price with VAT: £293.38
    £244.48 Price with VAT: £293.38
    SANDVIK 5431-125-021

    SANDVIK

    5431-125-021

    WEDGE CLAMP SET 4 PIECE
    ✓ IN STOCK!
    £35.22 Price with VAT: £42.26 Buy Surplus As Low As £14.94 Price with VAT: £17.93
    £14.94 Price with VAT: £17.93
    SANDVIK R840-1200-50-W1A-1220

    SANDVIK

    R840-1200-50-W1A-1220

    CORODRILL DELTA BIT C4 12MM
    ✓ IN STOCK!
    £17.86 Price with VAT: £21.43 Buy Surplus As Low As £9.79 Price with VAT: £11.75
    £9.79 Price with VAT: £11.75
    SANDVIK 5322-270-01

    SANDVIK

    5322-270-01

    SHIM 35DEGREE PRICE/EACH
    ✓ IN STOCK!
    £15.73 Price with VAT: £18.88 Buy Surplus As Low As £9.71 Price with VAT: £11.65
    £9.71 Price with VAT: £11.65
    SANDVIK 2552-4201

    SANDVIK

    2552-4201

    CARBIDE INSERT ROUND SCREW ON
    ✓ IN STOCK!
    £8.58 Price with VAT: £10.30 Buy Surplus As Low As £4.49 Price with VAT: £5.39
    £4.49 Price with VAT: £5.39
    Repair Yours Contact Us
    SANDVIK 946291285N

    SANDVIK

    946291285N

    MILLING TOOL HOLDER ADAPTER
    ✓ IN STOCK!
    £31.03 Price with VAT: £37.24 Buy Surplus As Low As £16.59 Price with VAT: £19.91
    £16.59 Price with VAT: £19.91
    Repair Yours Contact Us
    SANDVIK 431-220142-L62

    SANDVIK

    431-220142-L62

    INSERT FACE SHELL MILL CUTTER W/ TOOLS
    ✓ IN STOCK!
    Buy Surplus As Low As £34.55 Price with VAT: £41.46
    £34.55 Price with VAT: £41.46
    Repair Yours Contact Us
    SANDVIK SPCN1203EDR-A0

    SANDVIK

    SPCN1203EDR-A0

    INSERT CD10
    ✓ IN STOCK!
    £7.10 Price with VAT: £8.52 Buy Surplus As Low As £3.74 Price with VAT: £4.49
    £3.74 Price with VAT: £4.49
    Repair Yours Contact Us
    SANDVIK 393.14-25

    SANDVIK

    393.14-25

    COLLET .98-.079
    ✓ IN STOCK!
    £31.03 Price with VAT: £37.24 Buy Surplus As Low As £17.11 Price with VAT: £20.53
    £17.11 Price with VAT: £20.53
    Repair Yours Contact Us
    SANDVIK 431-820110R328

    SANDVIK

    431-820110R328

    MILLING ADAPTER
    ✓ IN STOCK!
    £33.67 Price with VAT: £40.40 Buy Surplus As Low As £17.99 Price with VAT: £21.59
    £17.99 Price with VAT: £21.59
    Repair Yours Contact Us
    SANDVIK 431-820110R320

    SANDVIK

    431-820110R320

    MILLING ADAPTER
    ✓ IN STOCK!
    Buy Surplus As Low As £34.55 Price with VAT: £41.46
    £34.55 Price with VAT: £41.46
    Repair Yours Contact Us
    SANDVIK SPCN1203EDR-A0CD10

    SANDVIK

    SPCN1203EDR-A0CD10

    INSERT CD10
    ✓ IN STOCK!
    £7.10 Price with VAT: £8.52 Buy Surplus As Low As £3.74 Price with VAT: £4.49
    £3.74 Price with VAT: £4.49
    Repair Yours Contact Us
    SANDVIK 170.3-852

    SANDVIK

    170.3-852

    SHIM
    ✓ IN STOCK!
    £9.68 Price with VAT: £11.62 Buy Surplus As Low As £5.09 Price with VAT: £6.11
    £5.09 Price with VAT: £6.11
    Repair Yours Contact Us
    SANDVIK C5PCLNL2211012

    SANDVIK

    C5PCLNL2211012

    DISCONTINUED BY MANUFACTURER, TURNING TOOL CUTTING UNIT, 110MM FUNCTIONAL LENGTH
    ✓ IN STOCK!
    Buy Surplus As Low As £90.59 Price with VAT: £108.71
    £90.59 Price with VAT: £108.71
    Repair Yours Contact Us
    SANDVIK 5762969

    SANDVIK

    5762969

    CAP SCREW FOR INDEXABLES: TORX PLUS, M4 THREAD
    £15.08 Price with VAT: £18.09 Buy Surplus As Low As £9.05 Price with VAT: £10.85
    £9.05 Price with VAT: £10.85
    SANDVIK SRSCL-12-3B

    SANDVIK

    SRSCL-12-3B

    TOOL HOLDER COROTURN 107 LEFT CUT 4.5IN LENGTH
    £96.49 Price with VAT: £115.78 Buy Surplus As Low As £58.04 Price with VAT: £69.65
    £58.04 Price with VAT: £69.65
    SANDVIK DTFNL-2525M-16

    SANDVIK

    DTFNL-2525M-16

    TOOL HOLDER RIGID CLAMP LEFT CUT 5.906IN LENGTH
    £84.43 Price with VAT: £101.31 Buy Surplus As Low As £50.50 Price with VAT: £60.61
    £50.50 Price with VAT: £60.61
    SANDVIK FCL-316L-30

    SANDVIK

    FCL-316L-30

    CLAMP 1-1/4IN HT HT 2-3/4IN ID 316SS
    £35.43 Price with VAT: £42.51 Buy Surplus As Low As £21.86 Price with VAT: £26.23
    £21.86 Price with VAT: £26.23
    SANDVIK R390-180608H-PL

    SANDVIK

    R390-180608H-PL

    CARBIDE INSERT 4020 - EACH
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.75 Price with VAT: £6.90
    £5.75 Price with VAT: £6.90
    SANDVIK WCMX050308-56

    SANDVIK

    WCMX050308-56

    CARBIDE DRILL INSERT PVC COATED TEN PACK
    Buy Surplus As Low As £33.92 Price with VAT: £40.71
    £33.92 Price with VAT: £40.71
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 5758574

    SANDVIK

    5758574

    CAP SCREW FOR INDEXABLES: TORX PLUS, #6-40 THREAD
    £8.29 Price with VAT: £9.95 Buy Surplus As Low As £4.98 Price with VAT: £5.97
    £4.98 Price with VAT: £5.97
    SANDVIK 5758539

    SANDVIK

    5758539

    SCREW FOR INDEXABLES:
    £1.87 Price with VAT: £2.24 Buy Surplus As Low As £1.12 Price with VAT: £1.34
    £1.12 Price with VAT: £1.34
    SANDVIK 746-315-062

    SANDVIK

    746-315-062

    TOOL BLANK 3 X 1/2 X 1/2INCH
    £10.18 Price with VAT: £12.21 Buy Surplus As Low As £4.90 Price with VAT: £5.88
    £4.90 Price with VAT: £5.88
    SANDVIK 5322-266-01

    SANDVIK

    5322-266-01

    STEEL SHIM FOR CARBIDE INSERT 55DEG DIAMOND
    £16.58 Price with VAT: £19.90 Buy Surplus As Low As £9.05 Price with VAT: £10.85
    £9.05 Price with VAT: £10.85
    SANDVIK 431-820110R321

    SANDVIK

    431-820110R321

    MILLING ADAPTER
    £31.89 Price with VAT: £38.26 Buy Surplus As Low As £17.98 Price with VAT: £21.57
    £17.98 Price with VAT: £21.57
    SANDVIK A6828

    SANDVIK

    A6828

    INSERT MILLING INDEXABLE
    £50.88 Price with VAT: £61.06 Buy Surplus As Low As £28.09 Price with VAT: £33.70
    £28.09 Price with VAT: £33.70
    SANDVIK 340.356272N26

    SANDVIK

    340.356272N26

    INSERT HOLDER SINGLE BIT
    £27.82 Price with VAT: £33.38 Buy Surplus As Low As £13.85 Price with VAT: £16.62
    £13.85 Price with VAT: £16.62
    SANDVIK A8514

    SANDVIK

    A8514

    END MILL INDECABLE INSERT COOLANT BULL NOSE
    £259.16 Price with VAT: £310.99 Buy Surplus As Low As £125.95 Price with VAT: £151.14
    £125.95 Price with VAT: £151.14
    SANDVIK RX123J020-16B-045

    SANDVIK

    RX123J020-16B-045

    PROFILING TOOLHOLDER, RIGHT HAND CUTTING DIRECTION, 45 DEGREE LEAD ANGLE, 170 MM LENGTH, 25.4 MM BACK OF BAR TO CUTTING EDGE, 48.3 MM HEAD LENGTH, SQUARE SHANK TYPE, STEEL MATERIAL
    £338.03 Price with VAT: £405.63 Buy Surplus As Low As £170.70 Price with VAT: £204.84
    £170.70 Price with VAT: £204.84
    SANDVIK A7698

    SANDVIK

    A7698

    SHELL MILL
    £35.78 Price with VAT: £42.94 Buy Surplus As Low As £22.08 Price with VAT: £26.49
    £22.08 Price with VAT: £26.49
    SANDVIK A-5873

    SANDVIK

    A-5873

    INSERT TOOL HOLDER
    Buy Surplus As Low As £40.71 Price with VAT: £48.85
    £40.71 Price with VAT: £48.85
    SANDVIK 431-820110R319

    SANDVIK

    431-820110R319

    MILLING ADAPTER
    £35.43 Price with VAT: £42.51 Buy Surplus As Low As £21.86 Price with VAT: £26.23
    £21.86 Price with VAT: £26.23
    SANDVIK DCLNL-164D-2

    SANDVIK

    DCLNL-164D-2

    TURNING TOOL HOLDER
    £152.27 Price with VAT: £182.72 Buy Surplus As Low As £91.21 Price with VAT: £109.45
    £91.21 Price with VAT: £109.45
    SANDVIK DCLNL-12-3C

    SANDVIK

    DCLNL-12-3C

    TOOL HOLDER
    £117.59 Price with VAT: £141.11 Buy Surplus As Low As £58.80 Price with VAT: £70.56
    £58.80 Price with VAT: £70.56
    SANDVIK 5512-086-01

    SANDVIK

    5512-086-01

    TORX SCREW, 17MM, 5 PACK
    £100.26 Price with VAT: £120.31 Buy Surplus As Low As £60.30 Price with VAT: £72.37
    £60.30 Price with VAT: £72.37
    SANDVIK 5512-086-01-EACH

    SANDVIK

    5512-086-01-EACH

    TORX SCREW 17MM
    £12.81 Price with VAT: £15.38 Buy Surplus As Low As £8.29 Price with VAT: £9.95
    £8.29 Price with VAT: £9.95
    SANDVIK 009242N49

    SANDVIK

    009242N49

    CARBIDE INSERT 2040GRADE
    £29.40 Price with VAT: £35.28 Buy Surplus As Low As £18.09 Price with VAT: £21.71
    £18.09 Price with VAT: £21.71
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 5758789

    SANDVIK

    5758789

    SCREW FOR INDEXABLES (MOQ=:5, PKG QTY=1)
    £3.75 Price with VAT: £4.50 Buy Surplus As Low As £2.25 Price with VAT: £2.70
    £2.25 Price with VAT: £2.70
    SANDVIK 5758635

    SANDVIK

    5758635

    SCREW FOR INDEXABLES (MOQ=:10, PKG QTY=1)
    £1.46 Price with VAT: £1.76 Buy Surplus As Low As £0.88 Price with VAT: £1.05
    £0.88 Price with VAT: £1.05
    SANDVIK SCLCR-1616K-09

    SANDVIK

    SCLCR-1616K-09

    TOOL HOLDER COROTURN 107SCREW 7DEG CLEARANCE ANGLE
    £72.37 Price with VAT: £86.84 Buy Surplus As Low As £43.72 Price with VAT: £52.46
    £43.72 Price with VAT: £52.46
    SANDVIK DCLNL-16-4D

    SANDVIK

    DCLNL-16-4D

    SANDVIK, DCLNL-16-4D, DCLNL164D, SHANK TOOL FOR TURNING, STEEL, SHANK HEIGHT: 1 INCH, SHANK WIDTH: 1 INCH, OVERALL LENGTH: 6 INCH, SQUARE SHANK TOOL, TOOL CUTTING EDGE ANGLE: 95 DEGREE, GAUG ...
    £112.32 Price with VAT: £134.78 Buy Surplus As Low As £67.84 Price with VAT: £81.41
    £67.84 Price with VAT: £81.41
    SANDVIK C4-LC2085-24102-16M

    SANDVIK

    C4-LC2085-24102-16M

    SANDVIK, C4-LC2085-24102-16M, C4LC20852410216M, RECTANGULAR SHANK, 2IN X 1IN, CLAMPING UNIT
    £1,166.89 Price with VAT: £1,400.26 Buy Surplus As Low As £583.44 Price with VAT: £700.13
    £583.44 Price with VAT: £700.13
    SANDVIK C5-A391.16-25-080

    SANDVIK

    C5-A391.16-25-080

    SANDVIK, C5-A391.16-25-080, C5A3911625080, COLLET CHUCK, PROJECTION 80MM,
    Buy Surplus As Low As £63.32 Price with VAT: £75.98
    £63.32 Price with VAT: £75.98
    SANDVIK 344-C8-391.01S-80-150

    SANDVIK

    344-C8-391.01S-80-150

    SANDVISK, 344-C8-391.01S-80-150, 344C839101S80150, EXTENSION ADAPTOR
    £429.40 Price with VAT: £515.28 Buy Surplus As Low As £214.70 Price with VAT: £257.64
    £214.70 Price with VAT: £257.64
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK C3-391.01-32-080-A

    SANDVIK

    C3-391.01-32-080-A

    SANDVIK, C3-391.01-32-080-A, C33910132080A, EXTENSION ADAPTOR, ADAPTIVE INTERFACE MACHINE DIRECTION (ADINTMS)COROMANT CAPTO (BOLT AND SEGMENT CLAMPING) -SIZE C3, COOLANT EXIT STYLE CODE (CXS ...
    £399.52 Price with VAT: £479.42 Buy Surplus As Low As £199.76 Price with VAT: £239.71
    £199.76 Price with VAT: £239.71
    Repair Yours £189.96 Price with VAT: £227.95
    Previous Next
    1 2 3 4 5 6 7 8 9 10