Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 101-150 of 496.
    SANDVIK 946294673

    SANDVIK

    946294673

    MILLING ADAPTER
    Buy Surplus As Low As £34.60 Price with VAT: £41.52
    £34.60 Price with VAT: £41.52
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 946231905

    SANDVIK

    946231905

    MILLING ADAPTER
    Buy Surplus As Low As £31.80 Price with VAT: £38.16
    £31.80 Price with VAT: £38.16
    Repair Yours Contact Us
    SANDVIK 431-820100R193-4

    SANDVIK

    431-820100R193-4

    ADAPTER COLLAR FOR MILLING ARBOR 1.75INCH OD
    Buy Surplus As Low As £11.50 Price with VAT: £13.80
    £11.50 Price with VAT: £13.80
    SANDVIK 824SP004

    SANDVIK

    824SP004

    RESISTOR CERAMIC 10OHM 10PERCENT
    Buy Surplus As Low As £12.06 Price with VAT: £14.47
    £12.06 Price with VAT: £14.47
    SANDVIK CRDCN-3225P-12-A

    SANDVIK

    CRDCN-3225P-12-A

    CLAMP/HOLDER W/CERAMIC INSERTS
    £140.21 Price with VAT: £168.25 Buy Surplus As Low As £84.43 Price with VAT: £101.31
    £84.43 Price with VAT: £101.31
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 180.009140N30S6

    SANDVIK

    180.009140N30S6

    SQUARE TURNING INSERT
    £35.43 Price with VAT: £42.51 Buy Surplus As Low As £21.86 Price with VAT: £26.23
    £21.86 Price with VAT: £26.23
    SANDVIK WCMX050308-56

    SANDVIK

    WCMX050308-56

    CARBIDE DRILL INSERT PVC COATED TEN PACK
    Buy Surplus As Low As £33.92 Price with VAT: £40.71
    £33.92 Price with VAT: £40.71
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK R390-180608H-PL

    SANDVIK

    R390-180608H-PL

    CARBIDE INSERT 4020 - EACH
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.75 Price with VAT: £6.90
    £5.75 Price with VAT: £6.90
    SANDVIK FCL-316L-30

    SANDVIK

    FCL-316L-30

    CLAMP 1-1/4IN HT HT 2-3/4IN ID 316SS
    £35.43 Price with VAT: £42.51 Buy Surplus As Low As £21.86 Price with VAT: £26.23
    £21.86 Price with VAT: £26.23
    SANDVIK DTFNL-2525M-16

    SANDVIK

    DTFNL-2525M-16

    TOOL HOLDER RIGID CLAMP LEFT CUT 5.906IN LENGTH
    £84.43 Price with VAT: £101.31 Buy Surplus As Low As £50.50 Price with VAT: £60.61
    £50.50 Price with VAT: £60.61
    SANDVIK SRSCL-12-3B

    SANDVIK

    SRSCL-12-3B

    TOOL HOLDER COROTURN 107 LEFT CUT 4.5IN LENGTH
    £96.49 Price with VAT: £115.78 Buy Surplus As Low As £58.04 Price with VAT: £69.65
    £58.04 Price with VAT: £69.65
    SANDVIK SCLCR-1616K-09

    SANDVIK

    SCLCR-1616K-09

    TOOL HOLDER COROTURN 107SCREW 7DEG CLEARANCE ANGLE
    £72.37 Price with VAT: £86.84 Buy Surplus As Low As £43.72 Price with VAT: £52.46
    £43.72 Price with VAT: £52.46
    SANDVIK MB-A0625-06-07R

    SANDVIK

    MB-A0625-06-07R

    BORING BAR INTERNAL COROCUT MB SCREW MOUNT
    £116.09 Price with VAT: £139.30 Buy Surplus As Low As £70.10 Price with VAT: £84.12
    £70.10 Price with VAT: £84.12
    SANDVIK 3212-012-360

    SANDVIK

    3212-012-360

    SCREW TORX PLUS 5/PK
    £3.20 Price with VAT: £3.84 Buy Surplus As Low As £1.92 Price with VAT: £2.30
    £1.92 Price with VAT: £2.30
    SANDVIK 148C-840-13

    SANDVIK

    148C-840-13

    TORX SETTING KEY .5IN
    £19.60 Price with VAT: £23.52 Buy Surplus As Low As £12.06 Price with VAT: £14.47
    £12.06 Price with VAT: £14.47
    SANDVIK TM-SU-100

    SANDVIK

    TM-SU-100

    DISCONTINUED BY MANUFACTURER, TOOL MONITOR, 100/115/230VAC
    Buy Surplus As Low As £308.10 Price with VAT: £369.72
    £308.10 Price with VAT: £369.72
    Repair Yours £269.59 Price with VAT: £323.51
    SANDVIK 265.2-872-1

    SANDVIK

    265.2-872-1

    INSERT SEAT CUTTING TOOL
    £79.90 Price with VAT: £95.88 Buy Surplus As Low As £48.24 Price with VAT: £57.89
    £48.24 Price with VAT: £57.89
    SANDVIK 009242N49

    SANDVIK

    009242N49

    CARBIDE INSERT 2040GRADE
    £29.40 Price with VAT: £35.28 Buy Surplus As Low As £18.09 Price with VAT: £21.71
    £18.09 Price with VAT: £21.71
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK TM-2000-012/1-A

    SANDVIK

    TM-2000-012/1-A

    PROCESS CONTROL
    Buy Surplus As Low As £792.26 Price with VAT: £950.71
    £792.26 Price with VAT: £950.71
    Repair Yours £693.23 Price with VAT: £831.88
    SANDVIK 5512-086-01-EACH

    SANDVIK

    5512-086-01-EACH

    TORX SCREW 17MM
    £12.81 Price with VAT: £15.38 Buy Surplus As Low As £8.29 Price with VAT: £9.95
    £8.29 Price with VAT: £9.95
    SANDVIK 5512-086-01

    SANDVIK

    5512-086-01

    TORX SCREW, 17MM, 5 PACK
    £100.26 Price with VAT: £120.31 Buy Surplus As Low As £60.30 Price with VAT: £72.37
    £60.30 Price with VAT: £72.37
    SANDVIK DCLNL-12-3C

    SANDVIK

    DCLNL-12-3C

    TOOL HOLDER
    £117.59 Price with VAT: £141.11 Buy Surplus As Low As £58.80 Price with VAT: £70.56
    £58.80 Price with VAT: £70.56
    SANDVIK DCLNL-164D-2

    SANDVIK

    DCLNL-164D-2

    TURNING TOOL HOLDER
    £152.27 Price with VAT: £182.72 Buy Surplus As Low As £91.21 Price with VAT: £109.45
    £91.21 Price with VAT: £109.45
    SANDVIK 431-820110R319

    SANDVIK

    431-820110R319

    MILLING ADAPTER
    £35.43 Price with VAT: £42.51 Buy Surplus As Low As £21.86 Price with VAT: £26.23
    £21.86 Price with VAT: £26.23
    SANDVIK 431-220244

    SANDVIK

    431-220244

    MILLING CUTTER 4.90INCH OD 2.17INCH ID 20TEETH
    Buy Surplus As Low As £37.41 Price with VAT: £44.89
    £37.41 Price with VAT: £44.89
    Repair Yours Contact Us
    SANDVIK A-5873

    SANDVIK

    A-5873

    INSERT TOOL HOLDER
    Buy Surplus As Low As £40.71 Price with VAT: £48.85
    £40.71 Price with VAT: £48.85
    SANDVIK A7698

    SANDVIK

    A7698

    SHELL MILL
    £35.78 Price with VAT: £42.94 Buy Surplus As Low As £22.08 Price with VAT: £26.49
    £22.08 Price with VAT: £26.49
    SANDVIK RX123J020-16B-045

    SANDVIK

    RX123J020-16B-045

    PROFILING TOOLHOLDER, RIGHT HAND CUTTING DIRECTION, 45 DEGREE LEAD ANGLE, 170 MM LENGTH, 25.4 MM BACK OF BAR TO CUTTING EDGE, 48.3 MM HEAD LENGTH, SQUARE SHANK TYPE, STEEL MATERIAL
    £338.03 Price with VAT: £405.63 Buy Surplus As Low As £170.70 Price with VAT: £204.84
    £170.70 Price with VAT: £204.84
    SANDVIK A8514

    SANDVIK

    A8514

    END MILL INDECABLE INSERT COOLANT BULL NOSE
    £259.16 Price with VAT: £310.99 Buy Surplus As Low As £125.95 Price with VAT: £151.14
    £125.95 Price with VAT: £151.14
    SANDVIK 340.356272N26

    SANDVIK

    340.356272N26

    INSERT HOLDER SINGLE BIT
    £27.82 Price with VAT: £33.38 Buy Surplus As Low As £13.85 Price with VAT: £16.62
    £13.85 Price with VAT: £16.62
    SANDVIK A6828

    SANDVIK

    A6828

    INSERT MILLING INDEXABLE
    £50.88 Price with VAT: £61.06 Buy Surplus As Low As £28.09 Price with VAT: £33.70
    £28.09 Price with VAT: £33.70
    SANDVIK 431-820110R321

    SANDVIK

    431-820110R321

    MILLING ADAPTER
    £31.89 Price with VAT: £38.26 Buy Surplus As Low As £17.98 Price with VAT: £21.57
    £17.98 Price with VAT: £21.57
    SANDVIK 5322-266-01

    SANDVIK

    5322-266-01

    STEEL SHIM FOR CARBIDE INSERT 55DEG DIAMOND
    £16.58 Price with VAT: £19.90 Buy Surplus As Low As £9.05 Price with VAT: £10.85
    £9.05 Price with VAT: £10.85
    SANDVIK 746-315-062

    SANDVIK

    746-315-062

    TOOL BLANK 3 X 1/2 X 1/2INCH
    £10.18 Price with VAT: £12.21 Buy Surplus As Low As £4.90 Price with VAT: £5.88
    £4.90 Price with VAT: £5.88
    SANDVIK 431-220142L62-1

    SANDVIK

    431-220142L62-1

    INSERT FACE SHELL MILL CUTTING
    £71.91 Price with VAT: £86.30 Buy Surplus As Low As £39.32 Price with VAT: £47.18
    £39.32 Price with VAT: £47.18
    SANDVIK 431-220142R60-1

    SANDVIK

    431-220142R60-1

    FACE/SHOULDER MILL
    £69.98 Price with VAT: £83.98 Buy Surplus As Low As £38.26 Price with VAT: £45.91
    £38.26 Price with VAT: £45.91
    Repair Yours Contact Us
    SANDVIK A-5819

    SANDVIK

    A-5819

    SHELL MILL
    £38.44 Price with VAT: £46.13 Buy Surplus As Low As £23.37 Price with VAT: £28.04
    £23.37 Price with VAT: £28.04
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK A5799

    SANDVIK

    A5799

    SHARPENING TOOL ACCESSORY
    £46.81 Price with VAT: £56.17 Buy Surplus As Low As £28.09 Price with VAT: £33.70
    £28.09 Price with VAT: £33.70
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 7695-1

    SANDVIK

    7695-1

    INSERT TOOL HOLDER 6.4L
    £43.42 Price with VAT: £52.10 Buy Surplus As Low As £26.05 Price with VAT: £31.26
    £26.05 Price with VAT: £31.26
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 946194321

    SANDVIK

    946194321

    MILLING ADAPTER A.C.T.S.LBA7846 OPLB100 STALB22-RH
    £151.29 Price with VAT: £181.55 Buy Surplus As Low As £90.77 Price with VAT: £108.93
    £90.77 Price with VAT: £108.93
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 949284508

    SANDVIK

    949284508

    MILLING ADAPTER
    Buy Surplus As Low As £31.80 Price with VAT: £38.16
    £31.80 Price with VAT: £38.16
    Repair Yours Contact Us
    SANDVIK A-6007

    SANDVIK

    A-6007

    COLLET BY SANDVIK
    £4.31 Price with VAT: £5.17 Buy Surplus As Low As £2.59 Price with VAT: £3.10
    £2.59 Price with VAT: £3.10
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 431-820100-R194-3

    SANDVIK

    431-820100-R194-3

    ADAPTER COLLAR MILLING ARBOR 1.24X1.75X5.2109INCH
    Buy Surplus As Low As £14.65 Price with VAT: £17.58
    £14.65 Price with VAT: £17.58
    SANDVIK 946288009

    SANDVIK

    946288009

    TOOL HOLDER DUAL TIP R/H
    Buy Surplus As Low As £34.60 Price with VAT: £41.52
    £34.60 Price with VAT: £41.52
    SANDVIK 949211304

    SANDVIK

    949211304

    MILLING ADAPTER
    £31.89 Price with VAT: £38.26 Buy Surplus As Low As £19.13 Price with VAT: £22.96
    £19.13 Price with VAT: £22.96
    Repair Yours £226.14 Price with VAT: £271.37
    SANDVIK 142508085

    SANDVIK

    142508085

    TAP COLLET RIGID ER 25-GB.318IN
    Buy Surplus As Low As £70.72 Price with VAT: £84.87
    £70.72 Price with VAT: £84.87
    SANDVIK RBIR43-S05F

    SANDVIK

    RBIR43-S05F

    CARBIDE INSERT HEAT RESISTANT TURNING GROOVING
    £8.82 Price with VAT: £10.58 Buy Surplus As Low As £4.82 Price with VAT: £5.78
    £4.82 Price with VAT: £5.78
    SANDVIK S-TNMU160408-PF-4015

    SANDVIK

    S-TNMU160408-PF-4015

    CARBIDE INSERT TURNING GRADE 4015
    £5.59 Price with VAT: £6.71 Buy Surplus As Low As £3.36 Price with VAT: £4.03
    £3.36 Price with VAT: £4.03
    SANDVIK A393.CG-12-06-40

    SANDVIK

    A393.CG-12-06-40

    COLLET 3/8INCH
    £196.65 Price with VAT: £235.98 Buy Surplus As Low As £98.06 Price with VAT: £117.67
    £98.06 Price with VAT: £117.67
    SANDVIK TNEF-12-04-AN-KM-K20W

    SANDVIK

    TNEF-12-04-AN-KM-K20W

    INSERT ROUGHING FOR AUTO MILL
    £30.91 Price with VAT: £37.09 Buy Surplus As Low As £15.83 Price with VAT: £19.00
    £15.83 Price with VAT: £19.00
    Previous Next
    1 2 3 4 5 6 7 8 9 10