SEARCH NOW FOR ALL YOUR SUPERSTRUT SOLUTIONS
Radwell is here to supply you with all your plant floor needs.
Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.
Filter Results
ABB THOMAS & BETTS
SUPERSTRUT
ZN219MEG
PLATE WITH MAGNETS, 90 DEGREE CORNER, HEIGHT 3-1/2 INCHES, LENGTH 5-3/8 INCHES, HOLE DIAMETER 9/16 INCH ON 1-7/8 INCH CENTERS, ELECTRO-GALVANIZED STEEL
£29.27
Price with VAT:
£35.12
ABB THOMAS & BETTS
SUPERSTRUT
AB245-TB
FOUR HOLE STEEL U-SUPPORT WITH GOLDGALV FINISH. HOLES ARE 9/16 INCH DIAMETER - ONE ON EACH LEG AND 2 IN MIDDLE ON 1-21/32 INCH CENTER. 1-5/8 INCH WIDE X 3-25/32 INCH BENT LENGTH, X 1/4 INCH ...
£29.27
Price with VAT:
£35.12
ABB THOMAS & BETTS
SUPERSTRUT
A1202B20PG
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 20 FEET, PRE-GALVANIZED STEEL, OPPOSITE SIDE TO SIDE COMBINATION
£39.02
Price with VAT:
£46.83
ABB THOMAS & BETTS
SUPERSTRUT
AB252-3HDG
CHANNEL BRACKET. 90 DEGREE ANGLE. 1 HOLE ON SHORT SIDE, 9/16 INCH DIAMETER. 7-7/8 INCH X 1-5/8 INCH. WIDTH 3-1/2 INCH. THICKNESS 1/4 INCH. ZINC COATING IS APPLIED BY HOT-DIPPING AFTER FABRIC ...
£24.77
Price with VAT:
£29.72
ABB THOMAS & BETTS
SUPERSTRUT
AB228-60HDGC
ANGULAR FITTING. OPEN 50 DEGREE ANGLE. 4 HOLES. 4-7/8 INCH SIDE X 5-1/4 INCH SIDE X 1-5/8 WIDTH. ZINC COATING IS APPLIED BY HOT-DIPPING AFTER FABRICATION. IS IN CONFORMANCE WITH ASTM A-123, ...
£76.55
Price with VAT:
£91.86
ABB THOMAS & BETTS
SUPERSTRUT
A1202A10HDGC
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 10 FEET, HOT-DIP GALVANIZED STEEL, SIDE TO SIDE COMBINATION
£46.53
Price with VAT:
£55.83
ABB THOMAS & BETTS
SUPERSTRUT
A1200P20HDGC
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 20 FEET, PUNCHED HOT-DIP GALVANIZED STEEL WITH 9/16 INCH HOLES ON 1-7/8 INCH CENTERS
£21.01
Price with VAT:
£25.22
ABB THOMAS & BETTS
SUPERSTRUT
S236-TB
BRACKET, 90 DEGREE, HEIGHT 6 INCHES, LENGTH 20-1/2 INCHES, WIDTH 1-5/8 INCH, HOLE DIAMETER 9/16 INCH, DESIGN UNIFORM LOAD 1,000 POUNDS (A1200 SERIES) 750 POUNDS (A1400 SERIES), STEEL
£244.65
Price with VAT:
£293.58
ABB THOMAS & BETTS
SUPERSTRUT
S226-TB
BRACKET, 90 DEGREE, HEIGHT 6 INCHES, LENGTH 18-1/2 INCHES, WIDTH 1-5/8 INCH, HOLE DIAMETER 9/16 INCH, DESIGN UNIFORM LOAD 1,000 POUNDS (A1200 SERIES) 750 POUNDS (A1400 SERIES), STEEL
£173.35
Price with VAT:
£208.03
ABB THOMAS & BETTS
SUPERSTRUT
U568-3EG
STRAP, BEAM CLAMP SAFETY, FLANGE WIDTH 6 INCHES, LENGTH 9 INCHES, ELECTRO-GALVANIZED STEEL, FOR USE WITH U-562 BEAM CLAMP
£10.51
Price with VAT:
£12.61
ABB THOMAS & BETTS
SUPERSTRUT
ZAB2413/8M
WASHER, SQUARE, SIZE 1-1/2 INCHES X 1-1/2 INCHES, BOLT SIZE 3/8 INCH, THICKNESS 3/16 INCH, STEEL WITH MAGNETS
£44.28
Price with VAT:
£53.13
ABB THOMAS & BETTS
SUPERSTRUT
H120010ALC
CHANNEL, 12 GAUGE, 1-5/8 INCH X 3-1/4 INCH, LENGTH 10 FEET, ALUMINUM
£21.01
Price with VAT:
£25.22
ABB THOMAS & BETTS
SUPERSTRUT
B1200S10T316L
CHANNEL, 12 GAUGE, 1-5/8 INCH X 13/16 INCH, LENGTH 10 FEET, SLOTTED TYPE 316 LOW CARBON STAINLESS STEEL WITH 7/16 INCH X 3 INCH SLOTS ON 4 INCH CENTERS
£67.54
Price with VAT:
£81.05
ABB THOMAS & BETTS
SUPERSTRUT
AB252-2HDG
90 DEGREE CORNER ANGLE BRACKET, HEIGHT 5-7/8 INCHES, LENGTH 1-7/8 INCH, MATERIAL HOT- DIP GALVANIZED STEEL
£81.05
Price with VAT:
£97.26
ABB THOMAS & BETTS
SUPERSTRUT
AB252-1HDG
90 DEGREE CORNER ANGLE BRACKET, HEIGHT 3-7/8 INCHES, LENGTH 1-7/8 INCH, MATERIAL HOT- DIP GALVANIZED STEEL
£38.27
Price with VAT:
£45.93
ABB THOMAS & BETTS
SUPERSTRUT
AW226HDGC
FITTING, TRIPLE WING SHAPE, LENGTH 5-13/32 INCHES, HEIGHT 2 INCHES, WIDTH 3-1/2, CHANNEL SIZE 1-5/8 INCHES X 1-21/32 INCHES, HOLE DIAMETER 1 INCH, HOT-DIP GALVANIZED STEEL
£73.54
Price with VAT:
£88.25
ABB THOMAS & BETTS
SUPERSTRUT
ZAB202M
FITTING, 90 DEGREE, HEIGHT 1-7/8 INCHES, BASE LENGTH 2 INCHES, HOLE DIAMETER 9/16 INCHES, STEEL WITH MAGNETS
£18.01
Price with VAT:
£21.61
ABB THOMAS & BETTS
SUPERSTRUT
S205HDGC
BRACKET, 90 DEGREE, HEIGHT 4 INCHES, LENGTH 10-1/2 INCHES, WIDTH 1-5/8 INCH, HOLE DIAMETER 9/16 INCH, DESIGN UNIFORM LOAD 650 POUNDS (A1200 SERIES) 500 POUNDS (A1400 SERIES), HOT-DIP GALVANI ...
£224.39
Price with VAT:
£269.26
ABB THOMAS & BETTS
SUPERSTRUT
NM-SRPC200
NONMETALLIC RIGID PIPE CLAMP. NOMINAL PIPE SIZE 2 INCH. DESIGN LOAD 300 POUNDS.
£46.53
Price with VAT:
£55.83
ABB THOMAS & BETTS
SUPERSTRUT
E142-1/2X300SS6C
SCREW, HEX HEAD CAP, SIZE 1/2 X 3 INCHES, TYPE 316 STAINLESS STEEL
£8.26
Price with VAT:
£9.91
ABB THOMAS & BETTS
SUPERSTRUT
A209SS6
SUPPORT, Z SHAPE, TWO HOLES WITH HOLE SIZE 1 INCH WITH 1-7/8 INCH SPACING ON CENTER, TYPE 316 STAINLESS STEEL, FOR USE WITH A SERIES CHANNEL
£218.38
Price with VAT:
£262.06
ABB THOMAS & BETTS
SUPERSTRUT
E148-5/16EGC
WASHER, LOCK, SIZE 5/16 INCH, ELECTRO-GALVANIZED STEEL
£0.09
Price with VAT:
£0.11
ABB THOMAS & BETTS
SUPERSTRUT
AB257-TB
FLAT CORNER FITTING 90 DEGREE, GOLDGALV STEEL, HEIGHT 3-1/2 INCHES, WIDTH 5-3/8 INCHES, THICKNESS 1/4 INCH, HOLE DIAMETER 9/16 INCHES, NUMBER OF HOLES 4. THREE HOLES ON LONG SIDE WITH 1-7/8 ...
£39.77
Price with VAT:
£47.73
ABB THOMAS & BETTS
SUPERSTRUT
AB241-5/8SS6
WASHER, SQUARE, SIZE 1-1/2 INCHES X 1-1/2 INCHES, BOLT SIZE 5/8 INCH, THICKNESS 1/4 INCH, TYPE 316 STAINLESS STEEL
£13.51
Price with VAT:
£16.21
ABB THOMAS & BETTS
SUPERSTRUT
AB252-4HDG
90 DEGREE CORNER ANGLE BRACKET, HEIGHT 7-7/8 INCHES, LENGTH 1-7/8 INCH, MATERIAL HOT- DIP GALVANIZED STEEL
£96.81
Price with VAT:
£116.17
ABB THOMAS & BETTS
SUPERSTRUT
A120210T316L
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 10 FEET, TYPE 316 LOW CARBON STAINLESS STEEL, BACK TO BACK COMBINATION
£98.31
Price with VAT:
£117.97
ABB THOMAS & BETTS
SUPERSTRUT
A1202S10T316L
CHANNEL, 12 GAUGE, 1-5/8 INCH X 1-5/8 INCH, LENGTH 10 FEET, SLOTTED TYPE 316 LOW CARBON STAINLESS STEEL WITH 7/16 INCH X 3 INCH SLOTS ON 4 INCH CENTERS, BACK TO BACK COMBINATION
£240.90
Price with VAT:
£289.07
ABB THOMAS & BETTS
SUPERSTRUT
NM-SSP158-240
CHANNEL NONMETALLIC STRUT SYSTEM. POLYESTER. 1-5/8 INCH X 1-5/8 INCH. 20 FOOT LENGTH. SINGLE. GREY. SOLID.
£336.20
Price with VAT:
£403.44
ABB THOMAS & BETTS
SUPERSTRUT
C727-5EG
RING, ADJUSTABLE SWIVEL, PIPE SIZE 5 INCHES, MAXIMUM LOAD 1,000 POUNDS, ELECTRO-GALVANIZED STEEL
£18.76
Price with VAT:
£22.51
ABB THOMAS & BETTS
SUPERSTRUT
AB253-TB
STRUT CHANNEL FLAT PLATE FITTING: USE WITH JOINING METAL FRAMING CHANNEL/STRUT STEEL, GOLD GALVANIZED
£20.49
Price with VAT:
£24.58
ABB THOMAS & BETTS
SUPERSTRUT
ZB14HS6EG
CHANNEL, 14 GAUGE, 1-5/8 INCH X 13/16 INCH, LENGTH 6 FEET, HALF SLOT ELECTRO-GALVANIZED STEEL WITH 9/16 INCH X 1-1/8 INCH SLOTS ON 2 INCH CENTERS
£132.83
Price with VAT:
£159.40
ABB THOMAS & BETTS
SUPERSTRUT
ZA1001/4EG-10
NUT, SPRING, SIZE 1/4 INCH, ELECTRO-GALVANIZED STEEL, FOR USE WITH A AND C SERIES CHANNEL AND INSERTS
£15.76
Price with VAT:
£18.91
ABB THOMAS & BETTS
SUPERSTRUT
S251-43HDGC
BRACKET. STRUT BRACKET. BACK TO BACK CHANNEL 43-1/2 INCH LENGTH X 6-1/4 INCH, 2-HOLE PLATE. HEIGHT X 1-5/8 INCH WIDTH. ZINC COATING IS APPLIED BY HOT-DIPPING AFTER FABRICATION. IS IN CONFORM ...
£309.19
Price with VAT:
£371.02
ABB THOMAS & BETTS
SUPERSTRUT
E147-3/4SS6
WASHER, FLAT, SIZE 3/4 INCH, TYPE 316 STAINLESS STEEL
£13.51
Price with VAT:
£16.21
ABB THOMAS & BETTS
SUPERSTRUT
E146-1/2EGC
NUT, STANDARD SQUARE, SIZE 1/2-13 INCH, ELECTRO-GALVANIZED STEEL
£3.05
Price with VAT:
£3.66
ABB THOMAS & BETTS
SUPERSTRUT
AC100-1/2SS6
NUT, SPRINGLESS, SIZE 1/2 INCH, TYPE 316 STAINLESS STEEL, FOR USE WITH A, C, E, AND H SERIES CHANNELS AND INSERTS
£48.78
Price with VAT:
£58.54
ABB THOMAS & BETTS
SUPERSTRUT
S256-26SS6
CANTILEVER BRACKET. STRUT BRACKET. CHANNEL 26-1/2 INCH LENGTH X 3-1/2 INCH, 2-HOLE PLATE. HEIGHT X 1-5/8 INCH WIDTH. DESIGN LOAD 250 POUNDS.316 STAINLESS STEEL.
£276.17
Price with VAT:
£331.40
ABB THOMAS & BETTS
SUPERSTRUT
CZ209SS6
SUPPORT, Z SHAPE, BASE LENGTH 1-7/8 INCH, HEIGHT 3-1/4 INCH, WIDTH 1-5/8 INCH, HOLE DIAMETER 1 INCH, TYPE 316 STAINLESS STEEL, FOR A SERIES CHANNEL BACK TO BACK
£51.78
Price with VAT:
£62.14
ABB THOMAS & BETTS
SUPERSTRUT
ZAB206MEG
PLATE WITH MAGNETS, TWO HOLE SPLICE, LENGTH 3-1/2 INCH, WIDTH 1-5/8 INCH, HOLE DIAMETER 9/16 INCH, ELECTRO-GALVANIZED STEEL
£18.01
Price with VAT:
£21.61
ABB THOMAS & BETTS
SUPERSTRUT
ZAB206M
PLATE WITH MAGNETS, TWO HOLE SPLICE, LENGTH 3-1/2 INCH, WIDTH 1-5/8 INCH, HOLE DIAMETER 9/16 INCH, GOLD GALVANIZED STEEL
£18.01
Price with VAT:
£21.61
ABB THOMAS & BETTS
SUPERSTRUT
S249-14HDGE
HOT DIP GALVANIZED HEAVY DUTY BRACKET 14-1/2 IN. EPOXY
£162.85
Price with VAT:
£195.42
ABB THOMAS & BETTS
SUPERSTRUT
E142-1/4X200SS6
SCREW, HEX HEAD CAP, SIZE 1/4 X 2 INCHES, TYPE 316 STAINLESS STEEL
£2.30
Price with VAT:
£2.76
ABB THOMAS & BETTS
SUPERSTRUT
NM-F38W
WASHER, FLAT, SIZE 3/8 INCH, NON-METALLIC
£34.52
Price with VAT:
£41.43
ABB THOMAS & BETTS
SUPERSTRUT
ZS716
CUSHIONED STRIP FOR ISOLATION AND VIBRATION APPLICATIONS, LENGTH 20 FEET
£398.49
Price with VAT:
£478.19
ABB THOMAS & BETTS
SUPERSTRUT
ZAB2411/4MEG
WASHER, SQUARE, SIZE 1-1/2 INCHES X 1-1/2 INCHES, BOLT SIZE 1/4 INCH, THICKNESS 1/8 INCH, ELECTRO-GALVANIZED STEEL WITH MAGNETS
£44.28
Price with VAT:
£53.13
ABB THOMAS & BETTS
SUPERSTRUT
C727-6EG
RING, ADJUSTABLE SWIVEL, PIPE SIZE 6 INCHES, MAXIMUM LOAD 1,250 POUNDS, ELECTRO-GALVANIZED STEEL
£19.51
Price with VAT:
£23.41
ABB THOMAS & BETTS
SUPERSTRUT
U544EG
ELECTRO GALVANIZED STRUT ADJUSTABLE SCREW END CAP
£80.26
Price with VAT:
£96.31
ABB THOMAS & BETTS
SUPERSTRUT
ZAB2411/4M
WASHER, SQUARE, SIZE 1-1/2 INCHES X 1-1/2 INCHES, BOLT SIZE 1/4 INCH, THICKNESS 1/8 INCH, STEEL WITH MAGNETS
£44.28
Price with VAT:
£53.13
