Product Search

    SEARCH NOW FOR ALL YOUR RADWELL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Machines / Lathe

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 101-150 of 153.
    KITAGAWA TNS2204

    KITAGAWA

    TNS2204

    LATHE CHUCK ACCESSORIES, ACCESSORY TYPE, T-NUT , PRODUCT COMPATIBILITY, B212 B212-15X, BL212 , CHUCK DIAMETER COMPATIBILITY (DECIMAL INCH), 12.0000 , NUMBER OF PIECES, 3 (MOQ=1, PKG QTY=1)
    £361.83 Price with VAT: £434.19 Buy Surplus As Low As £217.10 Price with VAT: £260.51
    £217.10 Price with VAT: £260.51
    PHASE II 250-065

    PHASE II

    250-065

    5 TO 8 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST
    £90.46 Price with VAT: £108.55 Buy Surplus As Low As £54.27 Price with VAT: £65.13
    £54.27 Price with VAT: £65.13
    PHASE II 250-200

    PHASE II

    250-200

    10 TO 15 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST
    £232.17 Price with VAT: £278.61 Buy Surplus As Low As £139.45 Price with VAT: £167.34
    £139.45 Price with VAT: £167.34
    PHASE II 250-100

    PHASE II

    250-100

    9 TO 12 INCH LATHE SWING, PISTON TYPE QUICK CHANGE TOOL POST
    £175.64 Price with VAT: £210.76 Buy Surplus As Low As £105.53 Price with VAT: £126.64
    £105.53 Price with VAT: £126.64
    PHASE II 250-075

    PHASE II

    250-075

    5 TO 8 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST
    £275.89 Price with VAT: £331.07 Buy Surplus As Low As £165.84 Price with VAT: £199.00
    £165.84 Price with VAT: £199.00
    PHASE II 250-111

    PHASE II

    250-111

    9 TO 12 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST
    £313.58 Price with VAT: £376.30 Buy Surplus As Low As £188.45 Price with VAT: £226.14
    £188.45 Price with VAT: £226.14
    PHASE II 250-333

    PHASE II

    250-333

    13 TO 18 INCH LATHE SWING, WEDGE TYPE QUICK CHANGE TOOL POST
    £545.75 Price with VAT: £654.90 Buy Surplus As Low As £327.90 Price with VAT: £393.49
    £327.90 Price with VAT: £393.49
    DAYTON ELECTRIC 467K89

    DAYTON ELECTRIC

    467K89

    LATHE, 14INX40IN, 2 INCH SPINDLE BORE, 1800 RPM, 2 1.4 HP
    £21,419.31 Price with VAT: £25,703.17 Buy Surplus As Low As £12,851.58 Price with VAT: £15,421.90
    £12,851.58 Price with VAT: £15,421.90
    Repair Yours £10,666.81 Price with VAT: £12,800.18
    JET 323231

    JET

    323231

    12" X 33" BENCH LATHE: GEARED HEAD, 2 HP, 230 V, (MOQ=1, PKG QTY=1)
    £19,402.88 Price with VAT: £23,283.46 Buy Surplus As Low As £11,641.73 Price with VAT: £13,970.08
    £11,641.73 Price with VAT: £13,970.08
    JET 321861

    JET

    321861

    26" X 80" ENGINE LATHE: GEARED HEAD, 10 HP, 230 V, (MOQ=1, PKG QTY=1)
    £72,674.12 Price with VAT: £87,208.95 Buy Surplus As Low As £43,604.47 Price with VAT: £52,325.37
    £43,604.47 Price with VAT: £52,325.37
    JET 321893

    JET

    321893

    26" X 120" ENGINE LATHE: GEARED HEAD, 10 HP, 230 V, (MOQ=1, PKG QTY=1)
    £82,627.33 Price with VAT: £99,152.80 Buy Surplus As Low As £49,576.85 Price with VAT: £59,492.22
    £49,576.85 Price with VAT: £59,492.22
    JET 892456

    JET

    892456

    14" X 40" ENGINE LATHE: FREQUENCY, 3 HP, 230 V, (MOQ=1, PKG QTY=1)
    £37,794.92 Price with VAT: £45,353.90 Buy Surplus As Low As £22,677.40 Price with VAT: £27,212.88
    £22,677.40 Price with VAT: £27,212.88
    CLAUSING 13-435VS

    CLAUSING

    13-435VS

    2.12 TO 13" SPINDLE ID MICROMETER CARRIAGE LATHE STOP STEEL (MOQ=1, PKG QTY=1)
    £514.09 Price with VAT: £616.91 Buy Surplus As Low As £309.06 Price with VAT: £370.87
    £309.06 Price with VAT: £370.87
    CLAUSING 13-436VS

    CLAUSING

    13-436VS

    2.12 TO 13" SPINDLE ID MICROMETER CARRIAGE LATHE STOP STEEL (MOQ=1, PKG QTY=1)
    £1,181.96 Price with VAT: £1,418.36 Buy Surplus As Low As £709.33 Price with VAT: £851.19
    £709.33 Price with VAT: £851.19
    CLAUSING 17-832

    CLAUSING

    17-832

    4 TO 18" SPINDLE ID MICROMETER CARRIAGE LATHE STOP STEEL (MOQ=1, PKG QTY=1)
    £980.70 Price with VAT: £1,176.84 Buy Surplus As Low As £588.72 Price with VAT: £706.46
    £588.72 Price with VAT: £706.46
    CLAUSING 17-833

    CLAUSING

    17-833

    4 TO 18" SPINDLE ID MICROMETER CARRIAGE LATHE STOP STEEL (MOQ=1, PKG QTY=1)
    £1,198.55 Price with VAT: £1,438.26 Buy Surplus As Low As £719.13 Price with VAT: £862.95
    £719.13 Price with VAT: £862.95
    CLAUSING 18-811

    CLAUSING

    18-811

    FOLLOW LATHE REST COMPATIBLE WITH TOOLROOM LATHES, 3/8 TO 9-3/8" WORKPIECE DIAM (MOQ=1, PKG QTY=1)
    £1,224.93 Price with VAT: £1,469.92 Buy Surplus As Low As £734.96 Price with VAT: £881.95
    £734.96 Price with VAT: £881.95
    CLAUSING 3-513

    CLAUSING

    3-513

    STEADY LATHE REST COMPATIBLE WITH TOOLROOM LATHES, 3/8 TO 4" WORKPIECE DIAM (MOQ=1, PKG QTY=1)
    £762.85 Price with VAT: £915.42 Buy Surplus As Low As £458.31 Price with VAT: £549.97
    £458.31 Price with VAT: £549.97
    CLAUSING 3-514

    CLAUSING

    3-514

    FOLLOW LATHE REST COMPATIBLE WITH TOOLROOM LATHES, 3/8 TO 3" WORKPIECE DIAM (MOQ=1, PKG QTY=1)
    £441.73 Price with VAT: £530.07 Buy Surplus As Low As £265.34 Price with VAT: £318.41
    £265.34 Price with VAT: £318.41
    CLAUSING 3-516

    CLAUSING

    3-516

    1-1/2 TO 13" SPINDLE ID MICROMETER CARRIAGE LATHE STOP STEEL (MOQ=1, PKG QTY=1)
    £561.58 Price with VAT: £673.90 Buy Surplus As Low As £336.95 Price with VAT: £404.34
    £336.95 Price with VAT: £404.34
    CLAUSING 3-517

    CLAUSING

    3-517

    1-1/2 TO 13" SPINDLE ID MICROMETER CARRIAGE LATHE STOP STEEL (MOQ=1, PKG QTY=1)
    £582.69 Price with VAT: £699.23 Buy Surplus As Low As £349.76 Price with VAT: £419.72
    £349.76 Price with VAT: £419.72
    CLAUSING CT618CNC/5

    CLAUSING

    CT618CNC/5

    6" X 18" TOOLROOM LATHE: VARIABLE SPEED PULLEY, 5 HP, 230 V 3 PHASE, 1-1/4" SPINDLE BORE DIA, 50 TO 6,000 RPM (MOQ=1, PKG QTY=1)
    £80,601.87 Price with VAT: £96,722.24 Buy Surplus As Low As £48,361.72 Price with VAT: £58,034.07
    £48,361.72 Price with VAT: £58,034.07
    CLAUSING M300-EW

    CLAUSING

    M300-EW

    13" X 40" ENGINE LATHE: GEARED HEAD, 3 HP, 230/460 V 3 PHASE, 1-9/16" SPINDLE BORE DIA, 40 TO 2,500 RPM (MOQ=1, PKG QTY=1)
    £22,115.07 Price with VAT: £26,538.08 Buy Surplus As Low As £13,269.19 Price with VAT: £15,923.03
    £13,269.19 Price with VAT: £15,923.03
    CLAUSING M300/25-EW

    CLAUSING

    M300/25-EW

    BENCH, ENGINE & TOOLROOM LATHES; HORSE POWER: 3HP ; PHASE: THREE ; SPINDLE SPEED CONTROL: GEARED HEAD ; BED WIDTH: 8IN ; CROSS SLIDE TRAVEL: 7.5IN ; MINIMUM SPINDLE SPEED: 40 (MOQ=1, PKG QTY ...
    £20,636.86 Price with VAT: £24,764.23 Buy Surplus As Low As £12,382.72 Price with VAT: £14,859.26
    £12,382.72 Price with VAT: £14,859.26
    CLAUSING V460/80-EW

    CLAUSING

    V460/80-EW

    18-7/64" X 80" ENGINE LATHE: FREQUENCY, 15 HP, 230 V 3 PHASE, 3" SPINDLE BORE DIA, 20 TO 2,000 RPM (MOQ=1, PKG QTY=1)
    £63,301.34 Price with VAT: £75,961.61 Buy Surplus As Low As £37,981.11 Price with VAT: £45,577.33
    £37,981.11 Price with VAT: £45,577.33
    CLAUSING V550/120-EW

    CLAUSING

    V550/120-EW

    21-7/8" X 120" ENGINE LATHE: FREQUENCY, 15 HP, 230 V 3 PHASE, 90 MM SPINDLE BORE DIA, 18 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £75,971.26 Price with VAT: £91,165.51 Buy Surplus As Low As £45,583.21 Price with VAT: £54,699.85
    £45,583.21 Price with VAT: £54,699.85
    CLAUSING V550/80-EW

    CLAUSING

    V550/80-EW

    21-7/8" X 80" ENGINE LATHE: FREQUENCY, 15 HP, 230 V 3 PHASE, 90 MM SPINDLE BORE DIA, 18 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £63,024.69 Price with VAT: £75,629.63 Buy Surplus As Low As £37,815.27 Price with VAT: £45,378.32
    £37,815.27 Price with VAT: £45,378.32
    ENCO MFG 1880ZX

    ENCO MFG

    1880ZX

    18" X 80" ENGINE LATHE: GEARED HEAD, 230/460 V 3 PHASE, 3-1/8" SPINDLE BORE DIA, 25 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £30,815.46 Price with VAT: £36,978.55 Buy Surplus As Low As £18,489.27 Price with VAT: £22,187.13
    £18,489.27 Price with VAT: £22,187.13
    ENCO MFG GH-1340A

    ENCO MFG

    GH-1340A

    ENGINE LATHE: SINGLE PHASE, 220V, 2 HP, GEARED HEAD 40MM BETWEEN CENTERS, 13MM SWING, 1.5000MM SPINDLE BORE (MOQ=1, PKG QTY=1)
    £8,571.49 Price with VAT: £10,285.79 Buy Surplus As Low As £5,143.20 Price with VAT: £6,171.84
    £5,143.20 Price with VAT: £6,171.84
    ENCO MFG GH-1440A

    ENCO MFG

    GH-1440A

    ENGINE LATHE: THREE PHASE, 220V, 2 & 3 HP, GEARED HEAD 40MM BETWEEN CENTERS, 14MM SWING, 1.5000MM SPINDLE BORE (MOQ=1, PKG QTY=1)
    £12,072.90 Price with VAT: £14,487.49 Buy Surplus As Low As £7,244.04 Price with VAT: £8,692.85
    £7,244.04 Price with VAT: £8,692.85
    ENCO MFG 1236STAND

    ENCO MFG

    1236STAND

    12" X 36" BENCH LATHE: GEARED HEAD, 110/220 V 1 PHASE, 1-1/2" SPINDLE BORE DIA, 65 TO 1,810 RPM (MOQ=1, PKG QTY=1)
    £5,772.62 Price with VAT: £6,927.15 Buy Surplus As Low As £3,463.72 Price with VAT: £4,156.47
    £3,463.72 Price with VAT: £4,156.47
    ENCO MFG 1660ZX

    ENCO MFG

    1660ZX

    16" X 60" ENGINE LATHE: GEARED HEAD, 230/460 V 3 PHASE, 3-1/8" SPINDLE BORE DIA, 25 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £33,065.56 Price with VAT: £39,678.67 Buy Surplus As Low As £19,839.33 Price with VAT: £23,807.20
    £19,839.33 Price with VAT: £23,807.20
    ENCO MFG 328-1313 F2AX

    ENCO MFG

    328-1313 F2AX

    16" X 60" ENGINE LATHE: GEARED HEAD, 230/460 V 3 PHASE, 3-1/8" SPINDLE BORE DIA, 25 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £27,841.70 Price with VAT: £33,410.05 Buy Surplus As Low As £16,705.02 Price with VAT: £20,046.03
    £16,705.02 Price with VAT: £20,046.03
    ENCO MFG C2(7"X12")

    ENCO MFG

    C2(7"X12")

    7" X 12" COMPACT LATHE: VARIABLE SPEED, 110V, SPINDLE 3MT, TAILSTOCK 2MT
    £1,160.10 Price with VAT: £1,392.12 Buy Surplus As Low As £696.51 Price with VAT: £835.82
    £696.51 Price with VAT: £835.82
    IMPORT MODEL XHD 2440

    IMPORT

    MODEL XHD 2440

    24" ENGINE LATHE: 25 HP, (MOQ=1, PKG QTY=1)
    £26,194.65 Price with VAT: £31,433.57 Buy Surplus As Low As £15,716.79 Price with VAT: £18,860.14
    £15,716.79 Price with VAT: £18,860.14
    IMPORT MODEL XHD 2460

    IMPORT

    MODEL XHD 2460

    24" ENGINE LATHE: 25 HP, (MOQ=1, PKG QTY=1)
    £28,342.23 Price with VAT: £34,010.68 Buy Surplus As Low As £17,005.79 Price with VAT: £20,406.95
    £17,005.79 Price with VAT: £20,406.95
    IMPORT MODEL XHD 2840

    IMPORT

    MODEL XHD 2840

    28" ENGINE LATHE: 25 HP, (MOQ=1, PKG QTY=1)
    £28,773.40 Price with VAT: £34,528.09 Buy Surplus As Low As £17,264.34 Price with VAT: £20,717.21
    £17,264.34 Price with VAT: £20,717.21
    ENCO MFG 6428026/3647518

    ENCO MFG

    6428026/3647518

    16" X 60" ENGINE LATHE: GEARED HEAD, 230/460 V, (MOQ=1, PKG QTY=1)
    £27,830.40 Price with VAT: £33,396.48 Buy Surplus As Low As £16,698.24 Price with VAT: £20,037.89
    £16,698.24 Price with VAT: £20,037.89
    ENCO MFG 6428027/3647494

    ENCO MFG

    6428027/3647494

    18" X 80" ENGINE LATHE: GEARED HEAD, 230/460 V, (MOQ=1, PKG QTY=1)
    £23,649.81 Price with VAT: £28,379.77 Buy Surplus As Low As £14,190.34 Price with VAT: £17,028.40
    £14,190.34 Price with VAT: £17,028.40
    ENCO MFG 6428028/3647494

    ENCO MFG

    6428028/3647494

    20" X 80" ENGINE LATHE: GEARED HEAD, 230/460 V, (MOQ=1, PKG QTY=1)
    £34,302.55 Price with VAT: £41,163.06 Buy Surplus As Low As £20,581.83 Price with VAT: £24,698.20
    £20,581.83 Price with VAT: £24,698.20
    ACU-RITE 558115-26

    ACU-RITE

    558115-26

    DRO LINEAR SCALE: 26" MAX MEASURING, 0.000200" RESOLUTION
    £806.57 Price with VAT: £967.88 Buy Surplus As Low As £483.94 Price with VAT: £580.73
    £483.94 Price with VAT: £580.73
    COSEN M2L-04-00

    COSEN

    M2L-04-00

    LATHE OVERHEAD CUTTER
    £1,500.82 Price with VAT: £1,800.99 Buy Surplus As Low As £900.79 Price with VAT: £1,080.95
    £900.79 Price with VAT: £1,080.95
    COSEN M2L-251-4+12-12

    COSEN

    M2L-251-4+12-12

    LATHE MACHINE PARTS; MACHINE COMPATIBILITY: LHT-25B
    £104.78 Price with VAT: £125.73 Buy Surplus As Low As £63.32 Price with VAT: £75.98
    £63.32 Price with VAT: £75.98
    IMPORT MODEL XHD 2860

    IMPORT

    MODEL XHD 2860

    28" ENGINE LATHE: 25 HP, (MOQ=1, PKG QTY=1)
    £30,922.50 Price with VAT: £37,107.00 Buy Surplus As Low As £18,554.10 Price with VAT: £22,264.92
    £18,554.10 Price with VAT: £22,264.92
    IMPORT MODEL XHD 2880

    IMPORT

    MODEL XHD 2880

    28" ENGINE LATHE: 25 HP, (MOQ=1, PKG QTY=1)
    £33,070.83 Price with VAT: £39,685.00 Buy Surplus As Low As £19,843.10 Price with VAT: £23,811.72
    £19,843.10 Price with VAT: £23,811.72
    IMPORT 24X80

    IMPORT

    24X80

    24" ENGINE LATHE: 25 HP, (MOQ=1, PKG QTY=1)
    £30,492.07 Price with VAT: £36,590.49 Buy Surplus As Low As £18,295.55 Price with VAT: £21,954.66
    £18,295.55 Price with VAT: £21,954.66
    ENCO MFG 5497254/4244014

    ENCO MFG

    5497254/4244014

    12" X 36" BENCH LATHE: GEARED HEAD, 110/220 V, (MOQ=1, PKG QTY=1)
    £12,043.51 Price with VAT: £14,452.21 Buy Surplus As Low As £7,226.71 Price with VAT: £8,672.05
    £7,226.71 Price with VAT: £8,672.05
    ENCO MFG 5497255/3647453

    ENCO MFG

    5497255/3647453

    13" X 40" BENCH LATHE: GEARED HEAD, 220 V, (MOQ=1, PKG QTY=1)
    £7,571.95 Price with VAT: £9,086.34 Buy Surplus As Low As £4,543.17 Price with VAT: £5,451.80
    £4,543.17 Price with VAT: £5,451.80
    ENCO MFG 6428025/5926708

    ENCO MFG

    6428025/5926708

    14" X 40" ENGINE LATHE: GEARED HEAD, 230/460 V, (MOQ=1, PKG QTY=1)
    £34,582.96 Price with VAT: £41,499.55 Buy Surplus As Low As £20,749.93 Price with VAT: £24,899.91
    £20,749.93 Price with VAT: £24,899.91
    ENCO MFG 8019247/3647453

    ENCO MFG

    8019247/3647453

    14" X 40" ENGINE LATHE: GEARED HEAD, 3 HP, 220 V, (MOQ=1, PKG QTY=1)
    £11,824.15 Price with VAT: £14,188.98 Buy Surplus As Low As £7,094.79 Price with VAT: £8,513.75
    £7,094.79 Price with VAT: £8,513.75
    Previous Next
    1 2 3 4
    Related Categories
    CNC Converter Diagnostic Equipment Drill Press Grease Lubricant Milling Machine Slitting/Slotting Blade Tool Bit Holder