Product Search

    SEARCH NOW FOR ALL YOUR SANDVIK SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 451-500 of 496.
    SANDVIK 930-HA06-HD-25-110

    SANDVIK

    930-HA06-HD-25-110

    DISCONTINUED BY MANUFACTURER, MODULAR CONNECTION, 1 AXIAL CONCENTRIC ENTRY / EXIT, 1.8902 INCH FUNCTIONAL DIAMETER, 2.4803 INCH CONNECTION DIAMETER, STEEL, REPLACED BY 8107455
    Buy Surplus As Low As £375.39 Price with VAT: £450.47
    £375.39 Price with VAT: £450.47
    SANDVIK 5564001-071

    SANDVIK

    5564001-071

    GAS SPRING
    £4,627.60 Price with VAT: £5,553.11 Buy Surplus As Low As £2,777.01 Price with VAT: £3,332.41
    £2,777.01 Price with VAT: £3,332.41
    SANDVIK AA3B05-50 38 061

    SANDVIK

    AA3B05-50 38 061

    SHELL MILL HOLDER, COROMANT
    £76.10 Price with VAT: £91.32 Buy Surplus As Low As £41.75 Price with VAT: £50.09
    £41.75 Price with VAT: £50.09
    SANDVIK 7255031

    SANDVIK

    7255031

    SHIM FOR INDEXABLES
    £18.09 Price with VAT: £21.71 Buy Surplus As Low As £11.31 Price with VAT: £13.57
    £11.31 Price with VAT: £13.57
    SANDVIK 6766945

    SANDVIK

    6766945

    16MM ID X 20MM OD, 25MM HEAD DIAM, SLOTTED HYDRAULIC CHUCK SLEEVE STEEL, 50MM LENGTH UNDER HEAD, THROUGH COOLANT
    £234.43 Price with VAT: £281.32 Buy Surplus As Low As £140.96 Price with VAT: £169.15
    £140.96 Price with VAT: £169.15
    SANDVIK 5762605

    SANDVIK

    5762605

    SHIM FOR INDEXABLES
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.88 Price with VAT: £7.06
    £5.88 Price with VAT: £7.06
    SANDVIK 6191592

    SANDVIK

    6191592

    TORX PLUS SCREW FOR INDEXABLES IND STD NO 5513 020-75, SERIES NOT APPLICABLE
    £10.55 Price with VAT: £12.66 Buy Surplus As Low As £6.33 Price with VAT: £7.60
    £6.33 Price with VAT: £7.60
    SANDVIK 5966368

    SANDVIK

    5966368

    0.9646 TO 1" ER40 COOLANT COLLET 1.811" OAL
    £182.42 Price with VAT: £218.90 Buy Surplus As Low As £110.06 Price with VAT: £132.07
    £110.06 Price with VAT: £132.07
    SANDVIK 5966358

    SANDVIK

    5966358

    1/4" ER25 ER COOLANT COLLET 1.3386" OAL, 1.0236" OVERALL DIAM
    £134.18 Price with VAT: £161.01 Buy Surplus As Low As £80.66 Price with VAT: £96.79
    £80.66 Price with VAT: £96.79
    SANDVIK 5763211

    SANDVIK

    5763211

    SCREW FOR INDEXABLES 5512 060 TOOLHOLDER
    £5.10 Price with VAT: £6.13 Buy Surplus As Low As £3.06 Price with VAT: £3.68
    £3.06 Price with VAT: £3.68
    SANDVIK 5763163

    SANDVIK

    5763163

    CAP SCREW FOR INDEXABLES: TORX PLUS, M2 THREAD
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.88 Price with VAT: £7.06
    £5.88 Price with VAT: £7.06
    SANDVIK 5763180

    SANDVIK

    5763180

    CAP SCREW FOR INDEXABLES: TORX PLUS, M2.5 THREAD
    £4.31 Price with VAT: £5.18 Buy Surplus As Low As £2.59 Price with VAT: £3.11
    £2.59 Price with VAT: £3.11
    SANDVIK 5763166

    SANDVIK

    5763166

    CAP SCREW FOR INDEXABLES: TORX PLUS, M6 THREAD
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.88 Price with VAT: £7.06
    £5.88 Price with VAT: £7.06
    SANDVIK 5763162

    SANDVIK

    5763162

    CAP SCREW FOR INDEXABLES: TORX PLUS, M5 THREAD
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.88 Price with VAT: £7.06
    £5.88 Price with VAT: £7.06
    SANDVIK 5763159

    SANDVIK

    5763159

    CAP SCREW FOR INDEXABLES: TORX PLUS, M3 THREAD
    £9.80 Price with VAT: £11.76 Buy Surplus As Low As £5.88 Price with VAT: £7.06
    £5.88 Price with VAT: £7.06
    SANDVIK 435-810111-L62

    SANDVIK

    435-810111-L62

    SANDVIK, 435-810111L62, 435810111L62, LATHE, TOOL HOLDER
    £463.59 Price with VAT: £556.31 Buy Surplus As Low As £232.17 Price with VAT: £278.61
    £232.17 Price with VAT: £278.61
    SANDVIK C4-RF123J25-27067B

    SANDVIK

    C4-RF123J25-27067B

    TURNING TOOL,AVAILABLE, SURPLUS, NEVER USED, 2 YEAR RADWELL WARRANTY THIS ITEM IS RESTRICTED FOR INTERNATIONAL SALE
    Buy Surplus As Low As £99.50 Price with VAT: £119.40
    £99.50 Price with VAT: £119.40
    SANDVIK C3-CP-01

    SANDVIK

    C3-CP-01

    COVER PLUGS
    £70.04 Price with VAT: £84.05 Buy Surplus As Low As £35.78 Price with VAT: £42.94
    £35.78 Price with VAT: £42.94
    SANDVIK 5764130

    SANDVIK

    5764130

    KEY & DRIVER FOR INDEXABLES: TORX PLUS DRIVE
    £27.89 Price with VAT: £33.47 Buy Surplus As Low As £17.34 Price with VAT: £20.81
    £17.34 Price with VAT: £20.81
    SANDVIK DTJNL-20-3D

    SANDVIK

    DTJNL-20-3D

    CLAMP TOOL HOLDER, 1.250IN SHANK WIDTH
    £104.78 Price with VAT: £125.73 Buy Surplus As Low As £52.77 Price with VAT: £63.32
    £52.77 Price with VAT: £63.32
    SANDVIK 570-DCLNL-32-12-L

    SANDVIK

    570-DCLNL-32-12-L

    T-MAX P TURNING TOOL 95 DEGREE CUTTING EDGE ANGLE
    £279.66 Price with VAT: £335.59 Buy Surplus As Low As £140.21 Price with VAT: £168.25
    £140.21 Price with VAT: £168.25
    SANDVIK 570-40-22-32

    SANDVIK

    570-40-22-32

    REDUCTION ADAPTOR 32X40X22MM
    £347.50 Price with VAT: £417.00 Buy Surplus As Low As £174.13 Price with VAT: £208.95
    £174.13 Price with VAT: £208.95
    SANDVIK 174.3-851M

    SANDVIK

    174.3-851M

    SHIM T-MAX LEVER DESIGN
    £8.82 Price with VAT: £10.58 Buy Surplus As Low As £3.74 Price with VAT: £4.49
    £3.74 Price with VAT: £4.49
    SANDVIK 440-000274R1-3220

    SANDVIK

    440-000274R1-3220

    INSERT COATED CARBIDE GRADE 3220
    £27.82 Price with VAT: £33.38 Buy Surplus As Low As £13.85 Price with VAT: £16.62
    £13.85 Price with VAT: £16.62
    SANDVIK BT25-TLSR-2545A-2I4M

    SANDVIK

    BT25-TLSR-2545A-2I4M

    DISCONTINUED BY MANUFACTURER, INSERT HOLDER CLAMP TYPE, BLACK
    Buy Surplus As Low As £40.71 Price with VAT: £48.85
    £40.71 Price with VAT: £48.85
    SANDVIK 393-CG-120840

    SANDVIK

    393-CG-120840

    COLLET 8MM ID 12MM OD 40MM L
    £68.60 Price with VAT: £82.32 Buy Surplus As Low As £39.54 Price with VAT: £47.45
    £39.54 Price with VAT: £47.45
    SANDVIK TCMT-22-04-08-KR-3215

    SANDVIK

    TCMT-22-04-08-KR-3215

    TURNING INSERT PRICE PER EACH
    Buy Surplus As Low As £17.25 Price with VAT: £20.71
    £17.25 Price with VAT: £20.71
    SANDVIK VDO

    SANDVIK

    VDO

    DISCONTINUED BY MANUFACTURER, PRESSURE GAUGE, CANCOCKPIT SLAVE, 0-250 BAR
    Buy Surplus As Low As £90.00 Price with VAT: £108.00
    £90.00 Price with VAT: £108.00
    SANDVIK RA216-25 04 M-M 4340

    SANDVIK

    RA216-25 04 M-M 4340

    MILLING INSERT, INSERT STYLE: RA216, INSERT SIZE: 25, INSERT SHAPE: BALL NOSE, INSERT MATERIAL: SOLID CARBIDE, MANUFACTURER GRADE: 4340
    £73.28 Price with VAT: £87.93 Buy Surplus As Low As £43.97 Price with VAT: £52.76
    £43.97 Price with VAT: £52.76
    SANDVIK 5760240

    SANDVIK

    5760240

    7MM ID X 12MM OD, 16MM HEAD DIAM, SEALED HYDRAULIC CHUCK SLEEVE STEEL, 40MM LENGTH UNDER HEAD, THROUGH COOLANT
    £174.88 Price with VAT: £209.86 Buy Surplus As Low As £105.53 Price with VAT: £126.64
    £105.53 Price with VAT: £126.64
    SANDVIK TM-2000-012/2

    SANDVIK

    TM-2000-012/2

    DISCONTINUED BY MANUFACTURER, PROCESS CONTROLLER
    Buy Surplus As Low As £660.00 Price with VAT: £792.00
    £660.00 Price with VAT: £792.00
    SANDVIK 266RG-22VW01A001M 1020

    SANDVIK

    266RG-22VW01A001M 1020

    COROTHREAD, 266 INSERT FOR THREAD TURNING
    £47.00 Price with VAT: £56.40 Buy Surplus As Low As £29.00 Price with VAT: £34.80
    £29.00 Price with VAT: £34.80
    SANDVIK 266RG-16NT01C080M 1125

    SANDVIK

    266RG-16NT01C080M 1125

    FULL THREAD PROFILE INSERT, EXTERNAL THREAD, 8 THREADS PER INCH, 1 TOOTH, 3 CUTTING EDGE, 4.4 MM FIXING HOLE DIAMETER, RIGHT HAND, T-MAX U-LOCK, T-MAX TWIN-LOCK
    £40.00 Price with VAT: £48.00 Buy Surplus As Low As £24.00 Price with VAT: £28.80
    £24.00 Price with VAT: £28.80
    SANDVIK 5724393

    SANDVIK

    5724393

    INSERT FOR TURNING, CNMG 120404-LC, INSERT GRADE 2025, CUTTING EDGES: 4
    £142.00 Price with VAT: £170.40 Buy Surplus As Low As £86.00 Price with VAT: £103.20
    £86.00 Price with VAT: £103.20
    SANDVIK 5759942

    SANDVIK

    5759942

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK 3.937" PROJECTION, THROUGH COOLANT
    £282.68 Price with VAT: £339.21 Buy Surplus As Low As £169.61 Price with VAT: £203.53
    £169.61 Price with VAT: £203.53
    SANDVIK 5758634

    SANDVIK

    5758634

    SCREW FOR INDEXABLES:
    £1.81 Price with VAT: £2.17 Buy Surplus As Low As £1.08 Price with VAT: £1.30
    £1.08 Price with VAT: £1.30
    SANDVIK 5757753

    SANDVIK

    5757753

    174.3-861, 1/2" INSCRIBED CIRCLE, SHIM PIN FOR INDEXABLE TURNING TOOLS
    £4.46 Price with VAT: £5.36 Buy Surplus As Low As £2.68 Price with VAT: £3.21
    £2.68 Price with VAT: £3.21
    SANDVIK 5757413

    SANDVIK

    5757413

    174.9 CLAMP SET FOR INDEXABLES
    £39.95 Price with VAT: £47.94 Buy Surplus As Low As £24.12 Price with VAT: £28.95
    £24.12 Price with VAT: £28.95
    SANDVIK 5757245

    SANDVIK

    5757245

    SCREW FOR INDEXABLES
    £3.55 Price with VAT: £4.26 Buy Surplus As Low As £2.13 Price with VAT: £2.56
    £2.13 Price with VAT: £2.56
    SANDVIK 5757219

    SANDVIK

    5757219

    SHIM FOR INDEXABLES: 3/4" INSCRIBED CIRCLE, TOOLHOLDER
    £49.00 Price with VAT: £58.80 Buy Surplus As Low As £29.40 Price with VAT: £35.28
    £29.40 Price with VAT: £35.28
    SANDVIK 5730021

    SANDVIK

    5730021

    LATHE CHUCK DRAW BOLT
    £168.85 Price with VAT: £202.62 Buy Surplus As Low As £101.76 Price with VAT: £122.12
    £101.76 Price with VAT: £122.12
    SANDVIK 5727020

    SANDVIK

    5727020

    CXR/L CLAMP FOR INDEXABLES
    £15.08 Price with VAT: £18.09 Buy Surplus As Low As £9.05 Price with VAT: £10.85
    £9.05 Price with VAT: £10.85
    SANDVIK 5726580

    SANDVIK

    5726580

    GROOVING TOOL:
    £64.83 Price with VAT: £77.79 Buy Surplus As Low As £39.20 Price with VAT: £47.04
    £39.20 Price with VAT: £47.04
    SANDVIK 5726522

    SANDVIK

    5726522

    GROOVING TOOL:
    £64.83 Price with VAT: £77.79 Buy Surplus As Low As £39.20 Price with VAT: £47.04
    £39.20 Price with VAT: £47.04
    SANDVIK 5726432

    SANDVIK

    5726432

    GROOVING TOOL:
    £56.54 Price with VAT: £67.84 Buy Surplus As Low As £33.92 Price with VAT: £40.71
    £33.92 Price with VAT: £40.71
    SANDVIK 5730052

    SANDVIK

    5730052

    COLLET CHUCK: ER COLLET, MODULAR CONNECTION SHANK
    £656.56 Price with VAT: £787.87 Buy Surplus As Low As £394.24 Price with VAT: £473.09
    £394.24 Price with VAT: £473.09
    Previous
    1 2 3 4 5 6 7 8 9 10